remove pulley - you need a Power Steering pulley puller and installer for Ford - unbolt pressure feed line and bolts holding pump to bracket. Remove clip or clamp holding return line. Install new pump
just 2000 ford ranger truck parts. I knoq that ford company made this Mazda b3000 model.
r-134a
Break it off.
Help truck wont start
To change the heater core in a 2000 Mazda truck, first disconnect the battery and drain the coolant. Remove the dashboard to access the heater core; this typically involves taking out various panels and components. Disconnect the hoses and mounting clips from the heater core, then remove the old unit and install the new one. Reassemble everything in reverse order, refill the coolant, and check for leaks.
Mounted on top and inside the fuel tank.
Drain the water from your Mazda Protege radiator. Remove the hoses from your radiator. Remove the radiator stabilizing arm. Remove the radiator retaining bolts. Reverse the process to install the new radiator.
no where eBay is best bet only about £3 UK
Left hand side below intake manifold remove the two bell housing bolts that hold starter in place. Bell housing bolts come off easiest from below truck you will be best to use a wobbly 14mm socket and at least a 12" extension. I had my tranny off several times now.
For the 1994 model (B3000), you can't change just the bulb. You have to change the headlight assembly.
Unless there is an access panel above the fuel tank inside the car you will have to remove the fuel tank.
it's in the trunk, under the carpeting, near the back in the centre.