You need to remove the upper hose and then the fan shroud on the upper half. The fan clutch is then held on with 4 bolts. Remove these and the fan will slide out from the engine. You might need to loosen the belt so you can turn the fan and get to all 4 bolts.
With the unit removed you can then remove and replace the fan on the clutch assy. Reinstall in the reverse order.
how do I remove the climate control from a 1999 toyota 4runner
To replace the thermostat on a 1991 V6 Toyota 4Runner, first, ensure the engine is cool, then disconnect the negative battery terminal. Drain the coolant from the radiator and remove the upper radiator hose to access the thermostat housing. Unbolt the thermostat housing, remove the old thermostat, clean the mating surfaces, and install the new thermostat with a new gasket. Finally, reassemble everything, refill the coolant, and check for leaks.
how do remove the tailgate's window motor on a toyota 4runner 1997 ?
To remove a cigarette lighter from a Toyota 4Runner, pull the lighter straight towards you. Pull gently until it becomes free.
anonumously
take the bolts out
Remove the rear wheel from the axle. Remove the brake pads and hardware. Remove the axle end cap. Remove the bearing. Reverse the process to install the new bearing.
Remove the front bumper to remove the radiator
With great difficulty
To remove a radiator from a 1997 Toyota Tacoma the truck needs to be cooled down. The coolant needs to be drained, and loosen the radiator mounts. When everything is loosen remove the radiator.
On a 1991 Toyota 4Runner, the horn is typically located in the front of the vehicle, behind the grille or near the radiator. To access it, you may need to remove the grille or reach through the engine compartment. It's a good idea to consult the vehicle's service manual for specific guidance on locating and troubleshooting the horn.
Remove the nuts! They are on the lower metal frame the seat