To replace the alternator belt on a 1994 Mazda Miata, first disconnect the negative battery terminal to ensure safety. Loosen the tensioner pulley by turning the adjustment bolt, then remove the old belt from the alternator and the pulleys. Install the new belt by routing it according to the belt diagram (usually found under the hood), ensuring it sits properly on all pulleys. Finally, adjust the tensioner to achieve the correct belt tension, recheck alignment, and reconnect the battery terminal.
with a few wrenches
same as the 1994
To replace the alternator on a 1994 Mazda B2300, first, disconnect the negative battery cable to ensure safety. Remove the drive belt by loosening the tensioner, then unbolt the alternator from its bracket. Disconnect the electrical connectors and remove the alternator from the engine bay. Install the new alternator by reversing the steps, making sure to reconnect all electrical components and reattach the drive belt properly.
It makes about 131 hp
1990 2365 lbs. 1994 2490 lbs.
the alternator is located under the inlet manifold
The fuse box on a 1994 Mazda Miata is located under the dashboard on the driver's side. To access it, you'll need to remove the cover panel beneath the steering wheel. The fuse box contains fuses for various electrical components of the vehicle, allowing you to easily check or replace any blown fuses.
The vacuum modulator on a 1994 Mazda Miata is located on the transmission, specifically on the automatic transmission models. It is typically mounted on the side of the transmission case and connected to the vacuum line from the intake manifold. If you are looking to inspect or replace it, make sure to check the vacuum lines for any signs of wear or damage as well.
either too tight or to loose, need about 8mm of give between alternator and drive pulley
1990 2365 lbs. 1994 2490 lbs.
Struts could of gone bad, otherwise its a miata....not meant for the hearty ones
Is there a Video that I can watch on How do you Replace the Alternator on a 1994 Dodge Caravan?