To replace the turbo on a 1989 Mazda MX-6, start by disconnecting the battery and removing any components obstructing access to the turbocharger, such as the intake and exhaust systems. Then, remove the oil and coolant lines connected to the turbo, followed by the mounting bolts securing the turbo to the manifold. Install the new turbo by reversing the disassembly steps, ensuring all seals and gaskets are replaced, and reattach the intake and exhaust components securely. Finally, reconnect the battery, check for leaks, and start the engine to ensure proper operation.
it is the lifters, so you will need to change the head
Non-Turbo: 120 HP / 130 lbft torque Turbo: 145 HP / 190 lbft torque
hi there iv got 1990 mx6 turbo running 8psi with a ihi vj11 bhb?5 turbo hope this helps ya
no Oil galleries do not line up
The H-type TransAxle from a 89-92 Probe GT, or Mazda MX6 GT. Stronger versions of the Probes GL and LX trim models to cope with the extra torque produced by the F2T Turbo Engine.
Take out the old ones and replace them with new ones.
If you are referring to the stock size speakers they are 4x6 in all four positions
this particular engine was an unusual 3 valves per cylinder with a turbo charger, it had an unusually good kick
Call a locksmith. In my area they charge about $80 for this service.
9 degrees btdc with test lead mear wipermotor earthed
Mazda removed the turbocharged 4 cylinder MX-6 engine (FT2 2.2L) in 1992. No model 1993+ came with a stock turbocharger.
mx6 got no moonroof - only a sunroof and YES its interchangeable