no the shifter linkage are not the same between the sohc and dohc
If it's a stock transmission, the shift linkage is mechanical.
To realign the shift linkage on your 1993 Mazda Miata, first, ensure the vehicle is securely lifted and supported. Locate the shift linkage under the car; you may need to remove some components for better access. You'll find a threaded adjustment on the linkage; loosen the lock nut and adjust the linkage to find the correct alignment, ensuring it smoothly engages all gears. Finally, tighten the lock nut and test the shifting to confirm the adjustment is effective.
The bushings on the shift linkage need to be replaced
A 1993 acura integra gsr transmission.. Wat kinda question is that?
To adjust the linkage transmission on a 1993 Plymouth Sundance, start by ensuring the vehicle is in park and the ignition is off. Locate the shift linkage at the base of the transmission and check for any loose or worn components. Adjust the linkage by loosening the adjustment nut and moving the linkage until it aligns properly with the transmission selector. Finally, tighten the nut and verify the adjustment by shifting through all gears to ensure smooth operation.
The gap for a 1993 Acura Integra is 0.44. Use a gapping tool.
no the 1993 acura integra headlights will not fit the 1995 integra, 90-93 acura integra are more of a rectangle shape as to where in the 1994-2001 integras except the type r, have round head lights
The car is not actually in reverse, it only looks so because the linkage between your transmission and the shift lever is broken or stretched. Most likely the tranmission is fine, but the linkage will need to be looked at or replaced.
Fot the 1993 acura integra timing belt 'cord' specifications. Is the honda made timing belt from fiberglass or kevlar ?
1993 Honda Civics get about 30 miles per gallon.
In my experience , my villager would not shift from park to anything. Found a T20 or T25 torx screw under dash by steering column to be really loose on shifter linkage. Works great now!
To change a starter from a 1993 Acura Integra remove the mounting bolts that connect it to the transmission. Then unplug the solenoid from the wire harness. Install the new unit.