No the engine in the 98 Mitsubishi eclipse spyder gs is a mitsubishi 4g64 while the engine in the 96 rs is a Chrysler 420a engine.
behind the engine
can you used a 2.0 liter complete witing harness for a 2.4 mitsubishi eclipse spyder engine
No. The gs is the base eclipse spyder model.
The second generation Mitsubishi Eclipse was put into production from 1995 to 1999. The convertible model called the Mitsubishi Eclipse Spyder was put into production in 1996.
Yes, the 01 eclipse spyder gs has 2.4 litre non-mivec
Any auto parts store will order Mitsubishi Eclipse Spyder weather-stripping. The prices will vary depending on the store you choose.
6582
Yes, you can, but there is a chance that you will need to change transmission and everything what is going inside the engine. The problem is that Mitsubishi engine parts from different engines are not compatible (it can be turbo Japanese engine, or non-turbo crysler engine and so on).
The crankshaft position sensor is located on the front of the engine inside the timing belt cover
In order to replace the rear engine mount on a 2001 Mitsubishi Eclipse Spyder GT v6 3.0L, one would first need to acquire a few jack stands to help accommodate the steps involved. From there, the Eclipse Chat Board would need to be lifted off, and the mount can be replaced from then on.
The windshield washer reservoir for a 1997 Mitsubishi Eclipse Spyder is located in the engine compartment, typically on the driver's side. It is usually a translucent plastic tank that can be identified by its cap, which often has a windshield wiper symbol on it. To access it, you may need to open the hood and look near the back of the engine bay.
It's probably 2.4L. The standard engine on the 1998 Eclipse GS is the 2.0 L I4 140 HP engine. The 2.4 L engine is not available on the GS, but is abvailable for the GS Spyder.