answersLogoWhite

0

To diagnose the check engine code on your 2000 Mazda Millenia, you'll need to retrieve the specific code using an OBD-II scanner. Common issues for that model could range from problems with the oxygen sensors, catalytic converter, or ignition system. Once you have the code, you can research the exact issue and decide whether to address it yourself or seek professional help. Always ensure to clear the code after repairs and monitor for any reoccurrence.

User Avatar

AnswerBot

5mo ago

What else can I help you with?

Related Questions

How many coils do a 2000 Mazda millenia s have?

a Mazda millenia with a miller cycl engine 2.3 engine has 6 igition coils


The check engine light is flashing on our 2000 Mazda Millenia. The car has 81000 miles.?

flashing check engine lite means do not drive, or you risk permanent engine damage. you need to get the codes scanned


What other struts will fit 2000 Mazda millenia?

2001 Mazda millenia


Where is the module located on a Mazda millenia 2000 2.5l?

how to change speedometer sensor on mazda millenia 2000 2.3 v6


How many miles per gallon does a 2000 Mazda millenia get?

The Mazda millenia from 2000 gets 20 mpg, 28 on the highway, and 25 on average.


Can i put the engine out of a 1995 Mazda millenia in a 2000 Mazda millenia?

No it cannot the radiator connection are postioned diffriently also the tranny mounts are ment to be further apart on a 2000 so u might have a shaky engine if try and fabricate then WRONG. physically it will fit perfectly. some of the sensors will be different


If the battery goes bad you replace the battery and get no response from a 2000 Mazda Millenia what do you do?

check the main fusible link


How do you replace a 2000 Mazda millenia alternator?

bottom


Does the 2000 Mazda millenia have a cabin air filter and if so where is it at?

millenia starting with my 2001 had cabin filters. 2000 my and before no hava


Where is the fuel pump relay on 2000 Mazda millenia 2.5L V6?

On a 2000 Mazda Millenia with a 2.5L V6 engine, the fuel pump relay is typically located in the engine compartment fuse box. You can find this fuse box near the driver's side of the engine bay. The relay can be identified by consulting the diagram on the fuse box cover to locate the specific relay for the fuel pump.


Where is the engine temp sensor on the 2000 mazda millenia?

On the 2000 Mazda Millenia, the engine temperature sensor is typically located near the thermostat housing. It is usually situated on the engine block or cylinder head, often connected to the cooling system. To access it, you may need to remove some components or covers, depending on the specific configuration of the engine. Always refer to a service manual for precise locations and steps specific to your vehicle.


What controls the hold light is on your 2000 Mazda millenia s?

Button on the shifter.