0
1. Turn the ignition switch to the ON position, marked II.
2. Press the LOCK button.
3. Turn the ignition switch to the Off position, marked I. Do this three times! Next, turn the ignition switch to the ON position (II) for a fourth time. Press the LOCK button again. The door locks should now make a cycling sound, indicating that the system has entered Programming Mode. Press the LOCK button one more time to program this remote. If you have other remotes to program, press the LOCK button on each one in turn. The door locks should make the cycling sound after you press LOCK on each remote. You may program up to three remotes, and they must all be programmed within ten seconds of each other. Turn the ignition off and remove the key. The remotes are now programmed and may be tested. If you've got a trunk/hatch release, hold the button for this function for a few seconds.
What else can I help you with?
How to Program keyless remote 2006 Honda civic?
you have to take it to the dealer
Where is the Honda Civic remote relay?
Honda civic remote relay
How do you disable a 1993 Honda civic alarm?
A 1993 Honda Civic alarm has an available program mode. To enable program mode place the key in the on position and press lock on the remote control 3. Do this three times in five seconds. Once in program mode the alarm can be reset.
How to Disable a 1993 Honda Civic Alarm?
The alarm in a 1993 Honda Civic can be disabled using the program mode. To enable the program mode pull the key in the on position while pressing lock on the remote. Do this three times in five seconds and program mode will become enabled.
2007 Honda Civic remote start?
What about it?
Where is the heater control valve on a 2001 Honda Civic?
Locate heater control valve in a 2001 Honda civic
Do all Honda Civics come with an alarm and remote for them?
Not all Honda Civics come with an alarm but I own a 1997 Honda Civic that came with a remote.
How do you reset the stock alarm on a 2002 Honda Civic?
The stock alarm on a 2002 Honda Civic can be reset by putting the system into program mode. Program mode is enabled by turning the key to on three times and pressing the lock button on the remote. This process must be done three times in under five seconds.
How to program a 2006 Honda civic key?
only dealer can do it
How do you disable the alarm on a 2000 Honda Civic?
Honda OEM alarms make use of a program mode. This program mode is also available on a 2000 Honda Civic. Once enabled the program mode will allow a user to disarm the alarm system on the car.
Where is the cruise control module in a 1997 Honda Civic?
The 1997 Honda Civic cruise control module can be found on the firewall in the engine compartment. The cruise control module will be on the drivers side of the firewall.
How do you program Honda Civic key fob?
with mvp pro programmer
