You have too take off the bumper before you take off the light.
To remove the tail light lens on a 2002 Lexus LS430, first, open the trunk and locate the access panel behind the tail light assembly. Remove any screws or clips securing the access panel, then gently pull it away. Disconnect the electrical connector from the tail light assembly, and remove the screws holding the tail light in place. Finally, carefully pull the tail light assembly out, and the lens can be detached from it.
Remove the two securing lock pins and pull out
Raise the hatch & there are 2 tail light assemble mount screws...remove screws to remove the entire assembly. Look on the back side & remove the bulb that needs to be relaced
tail light fuse 2002 monti Carlo
If you can't get to the back of the light through the trunk, you have to remove the light to change the bulb from the rear.
You can access the Nissan taillights from the cargo compartment. Remove the tail light assembly cover. Remove the tail light wiring harness. Remove the tail light assembly retaining bolts.
2002 what?
You will need to remove the tail light covers in the cargo compartment. Remove the wiring harness. Remove the tail light assembly retaining bolts.
Raise the back hatch there is two screws that hold the tail light on (2002 ford explorer) remove the tail light and twist out bulb housing , pull release clips and remove bulb. Install bulb in reverse.
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
To change your Durango's tail light, first make sure to have a flat head screw driver and a new bulb. You will then open your trunk and remove the screws to the tail light, swap out the bulbs and replace the housing case.
Remove the tail light assembly (as I recall, it attaches with a couple of screws and is clipped to the body). Remove the bulb holder, replace the bulb, reassemble.