0
Reverse lights on a 98 KIA Sportage manual transmission does not come on when put into reverse What would you check?
Sounds as though it could be a few areas to look at, 1. check that it is not the bulbs, (access through rear plastic compartments inside car). 2. check that the fuse for reverse tail lights is not blown (front fuse panel next to accelerator pedal)and 3. try to remove the cover plate or sleeve around gear stick as there is a small switch that activates lights when put into reverse (may have dislogded the wiring). Hope this helps.
What else can I help you with?
Location for the switch for reverse lights on a ford Windstar?
The switch for the reverse lights on a Ford Windstar is typically located on the transmission. Specifically, it's often found on the transmission case, near the shift linkage. This switch is activated when the transmission is shifted into reverse, completing the circuit for the reverse lights. If you're having issues with the reverse lights, checking the switch and its wiring is a good first step.
How do you fix the reverse lights on a 1987 Nissan Pathfinder when all the other lights and fuses work but when you shift in reverse you get no reverse lights?
Try bypassing the reverse light switch that plugs into the transmission. If your reverse lights come on, voila! Problem solved. Buy a new switch.
How do you fix the reverse lights on a 1999 Hyundai Accent when all other lights and fuses work but when you shift it in reverse you get no reverse lights?
The problem is the reverse light switch. It is located on the top of the transmission that should sloved your problem.
Why are the reverse lights not working on Chevy S10 after bulbs are changed and fuse is okay?
switch on the transmission which sends a signal to the reverse lights when shift is in reverse......... is shot. You need a mechanic.
I have a 1997 Dodge Ram 1500 with a manual transmission. The backup light does not come on when I engage the transmission into reverse. Does anyone know how to fix it?
It's a matter of replacing the reverse position swith in the transmission. This switch tells the computer wheter it's in neutral, or reverse and when in reverse it triggers the reverse lights.
I replaced the reverse lights. Then checked the fuse and it was all right. How come the reverse lights still don't come on Could it be the reverse switch on the transmission?
Very possible ... best to check the wiring with a voltmeter checking for +12vdc.
Are the Reverse Lights on 94' Tarus linked to the Transmission?
The reverse lights on a 94' Ford Taurus are linked to the transmission to indicate when the vehicle is moving backwards. This is done for safety reasons as cars are typically moving forward.
How do I change the reverse light fuse on Megane Mk 11 and where is the fuse box the reverse lights are not working but everything else is.?
It may be the reverse light switch that need replacing, which is on the transmission.
What fuse powers the reverse lights on a 2000 dodge neon?
It's most likely the reverse/neutral safety switch located on your transmission
How many reverse lights do i have on my peugeot 307?
The Peugeot 307 typically has two reverse lights, one on each side of the rear of the vehicle. These lights activate when the transmission is in reverse to alert other drivers and pedestrians. If you're unsure, you can check the vehicle's manual or inspect the rear lights directly.
205 diesel Inca peugeot reverse lights are not working even though all the fuses are ok the brake lights all work. Also one fog light works at the rear but the other rear doesn't help please thanks.?
for reverse lights, check the reverse light switch that is located on the transmission. for fog light, check bulbs, or broken wires for reverse lights, check the reverse light switch that is located on the transmission. for fog light, check bulbs, or broken wires
On a 2001 Jeep Wrangler Sahara 4.0 ltr the reverse lights are out Does the wiring on top of the transmission have anything to do with it?
Reverse light switch is probaly connected to switch on transmission check connections
