0
What else can I help you with?
Torque settings for citroen saxo cylinder head bolts?
in sequence torque bolts to 20nm, then again in sequence turn a futher 120 degrees, and again in sequence 120 degrees.
What is the cylinder head torque specs for a Honda 650 rincon?
what it the torque spec for head bolts on a 650 honda rincon 2005
How do you install cylinder head bolts on a 1996 Saturn?
What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
What is the cylinder head torque on a 5.7 HEMI?
Tighten the cylinder head bolts in three steps using the sequence provided : ==== ==== # Step 1- Snug tighten M12 cylinder head bolts, in sequence, to 34 N·m (25 ft. lbs.) and M8 bolts to 20 N·m (15 ft. lbs.) torque. # Step 2- Tighten M12 cylinder head bolts, in sequence, to 54 N·m (40 ft. lbs.) and verify M8 bolts to 20 N·m (15 ft. lbs.) torque. # Step 3- Turn M12 cylinder head bolts, in sequence, 90 degrees and tighten M8 bolts to 34 N·m (25 ft. lbs.) torque.
Cylinder head torque 2000 Honda civic 1.6l?
The cylinder head torque on a 2000 Honda Civic is set at two different rates. For placing the head correctly the bolts need to be tighten to 22 ft torque. Once correctly set the bolts will need 49 ft torque to be properly tighten.
What are the cylinder head torque specs and torque sequence on a 1996 Honda accord 22?
This is a multi step process. 1. Torque all bolts starting in the middle and working your way diagonally to outside bolts torquing to 29 ft/lbs. 2. Torque all bolts again in same pattern to 54 ft/lbs. 3. Final torque to 72 ft/lbs.
What is the torque rating for the head bolt on 93 subaru 1.8 4 cylinder engine?
NOTEStep 1: Tighten all bolts to 22 ft. lbs.Step 2: Tighten all bolts to 51 ft. lbs.Step 3: Loosen all bolts, in reverse torque sequence, by 180°Step 4: Loosen all bolts, in reverse torque sequence again by 180°Step 5: Tighten bolts #1 and #2, in the torque sequence, to25 ft. lbs.Step 6: Tighten bolts #3,4,5 and #6, in the torque sequence, 11 ft. lbs.Step 7: Tighten all bolts, in torque sequence, by 80-90°Step 8: Tighten all bolts, in torque sequence, again by 80-90°
What are the torque settingsand tightening sequence for the cylinder head bolts on a Kia Sedona 2.9?
http://wiki.answers.com/Q/What_are_the_torque_settingsand_tightening_sequence_for_the_cylinder_head_bolts_on_a_kia_sedona_2.9 the cylinder head bolts on a kia sedona 2.9?"
What are the torque specs for 1986 Honda trx200sx for the cam bolts and cylinder head?
25-35 ftlbs
What is the cylinder head torque sequence for a 1997 ford escort 2.0l?
torque head bolts and order ford 1997 2.0L picture if avalible please
How much is the torque of 2c cylinder head bolts Toyota?
torque for 2c engine cylinder head bolts
Cylindear heads torque Dodge Dakota 1997?
4 cylinder: Bolt 7 is on the front driver's corner. # Tighten all bolts in sequence (1 through 10) to 30 N·m (22 ft. lbs.) torque. # Tighten all bolts in sequence (1 through 10) to 61 N·m (45 ft. lbs.) torque. # Check all bolts to verify they are set to 61 N·m (45 ft. lbs.) torque. # Tighten bolts (in sequence): # Bolts 1 through 6 to 149 N·m (110 ft. lbs.) torque. * Bolt 7 to 136 N·m (100 ft. lbs.) torque. * Bolts 8 through 10 to 149 N·m (110 ft. lbs.) torque. # Check all bolts in sequence to verify the correct torque. All "V" engines: Starting at top center, tighten all cylinder head bolts, in sequence, to 68 N·m (50 ft. lbs.) torque , Repeat procedure, tighten all cylinder head bolts to 143 N·m (105 ft. lbs.) torque. Repeat procedure to confirm that all bolts are at 143 N·m (105 ft. lbs.) torque.
