25-35 ftlbs
what it the torque spec for head bolts on a 650 honda rincon 2005
The cylinder head torque on a 2000 Honda Civic is set at two different rates. For placing the head correctly the bolts need to be tighten to 22 ft torque. Once correctly set the bolts will need 49 ft torque to be properly tighten.
torque for 2c engine cylinder head bolts
Torque to 20ft/lbs initially. Then tighten to 65ft.lbs. Oil head bolts before installing.
torque setting for cylinder head bolts for a skoda felicia
The torque specs for a Toyota Camry cylinder head is 60 pounds for the inside bolts and 50 pounds for the site bolts. The cylinder head bolts should be tight from and to end alternating.
22lbs on the first pass and then 47lbs on the second pass ...good to go
torque settings for cylinder head bolts
This is a multi step process. 1. Torque all bolts starting in the middle and working your way diagonally to outside bolts torquing to 29 ft/lbs. 2. Torque all bolts again in same pattern to 54 ft/lbs. 3. Final torque to 72 ft/lbs.
You should measure the diameter of the bolts concerned. The information I have applies to the 250 cc as well as the 100 cc versions of this bike. For the 10 mm cylinder head bolts they torque to 27 to 31 foot-pounds. The 6 mm head bolts torque from 7 to10 foot-pounds. The 8mm cylinder cover bolt should torque from 15 to 20 foot-pounds. Hope this helps. .
1991 toyota camry head bolts torque specs
The cylinder head bolt torque specification is 90 pounds. The cylinder head bolts should be torqued in 30 pound intervals.