First check the fuse. If this is ok the problem is most likely the “Flasher Unit”. The Flasher Unit is located behind the dash.
my turning signals dont work on my 91 integra LS. They were working a day before. so the next day they werent. I also had battery problems but i had checked every single fuse and the fuses arent burn. My turning signals do not work what so ever.
Sounds very much like the distributor
you could have crossed the wires somehow or caused them to short out.
If the turning signals on your Range Rover are not working, first check the fuse related to the turn signals, as a blown fuse can cause them to fail. Next, inspect the bulbs for any burnouts and replace them if necessary. Additionally, ensure the turn signal lever is functioning properly and not stuck. If the issue persists, it may be necessary to consult a professional mechanic for further diagnosis.
Check the bulb it is double filamented with the smaller being for the stop and turn signals
The PA Motor Vehicle Code, § 3334. Turning movements and required signals- says that you will use your turn signals or hand signals when you are turning or changing lanes.
Check the bulbs first but it can also be the flasher.
The different types of signals that can be used on a bicycle to indicate turning intentions are hand signals and electronic signals. Hand signals involve extending the left or right arm out to indicate the direction of the turn. Electronic signals are typically found on modern bicycles and include flashing lights on the front and back of the bike to indicate turning intentions.
That is a good thing. You want the turn signals to work.
I can't say for your specific year but I was just working on a 94 model and on the right side of the bike is the fuse block and the top fuse which is 15A powers both the turn signals and the brake light.
Their is no Possible way :) :(
if only the turn signals are not working,you should replace the flasher can