0
What else can I help you with?
What are the car specs for the Nissan 200SX?
The Nissan Silvia 200SX is a three door hatchback. The 200SX has a wheelbase of 2474mm. It has a 1.8 litre engine and is available as a 5 speed manual or a 4 speed automatic.
Is the transmition out of a 93 Nissan pickup with the same specs compatible with a 95 Nissan pickup?
no,the specs. are not the same.
What are the torque specs and torque sequence for a 1992 Nissan Maxima intake manifold?
what are the torque specs and sequence for a 1992 Nissan maxima manifold
What are the torque specs for the cylinder head of a 1997 Nissan 200sx?
If you are actually searching here for cylinder head torque specs and plan on cranking down on the bolts..stop! Go spend the $10-$20 on a haynes or chiltons manual before you snap off a bolt, warp your head, or do something else that causes damage and leads to an expensive repair.
What are the torque specs for a yd 25 Nissan engine?
what is the torque specs for a y d 25 2004 model nissan frontier main bearing and rods on engine
What are the cylinder head torque specs and sequence for Nissan 200sx turbo?
For the Nissan 200SX Turbo (SR20DET engine), the cylinder head torque specs typically require an initial torque of 30 ft-lbs (40 Nm), followed by a second round of 60 ft-lbs (81 Nm), and then an additional 90-degree turn on each bolt. The torque sequence usually starts from the center bolts and moves outward in a spiral pattern to ensure even pressure distribution. Always consult the specific service manual for your vehicle for precise specifications and sequences, as they may vary slightly based on the year and engine version.
What is theTorque specs for axle spindle nut for 1994 Nissan Quest?
The torque specs for the 1993-2002 Nissan Quest FWD is 203 Ft-Lbs or 275 Nm.
What are the specs on a 1990 Nissan 300zx?
http://www.zshop.net.au/Z32tech.htm
What is the torque specs on a Nissan 2.4 liter head?
alot
What is the 0-100 time for Nissan Micra?
about 12 seconds See related link for specs on the Nissan Micra
What are the torque specs for the fly wheel and clutch plate on a 1995 Nissan 200sx ser?
For a 1995 Nissan 200SX SE-R, the torque specifications for the flywheel bolts are typically around 60-70 lb-ft (81-95 Nm). For the clutch plate, the pressure plate bolts should be torqued to approximately 12-15 lb-ft (16-20 Nm). Always refer to a repair manual for your specific vehicle for the most accurate information, as values can vary slightly based on the specific engine and transmission combination.
Does a Mercury Villager has Ford engine or Nissan?
It is a Nissan 3.0 or 3.3 V-6 with some modifications to Ford's specs.
