For the front wheels the caster setting is 3.15 degrees and the camber is 0 degrees with a toe in of 0 inches. For the rear it is -0.5 degrees of camber and 0.08 inches toe in.
The wheel alignment specifications of a Ford E250 Van can be found by consulting the owner's manual. The specs can also be requested from the dealer or manufacturer.
About 75 bucks a wheel.
Yes
yes to balance well
stock is 17''
it never allows people to go hard
To fix a Mongoose Rebel wheel alignment, first check the tire pressure and ensure it meets manufacturer specifications. Next, inspect the front and rear wheel alignment using a straight edge or alignment tool; adjust the wheel alignment by adjusting the tie rods or camber bolts if necessary. If you’re unsure or the issue persists, it's best to consult a professional bike mechanic for a thorough inspection and proper adjustments. Regular maintenance can help prevent future alignment issues.
The rear wheel bearing torque setting for a 2001 Hyundai XG300 typically ranges between 74 to 108 foot-pounds, depending on the specific service manual guidelines. It's important to ensure that the bearings are properly seated and that the axle nut is torqued to the manufacturer's specifications to avoid any issues with wheel alignment or bearing wear. Always consult the vehicle's service manual for the most accurate and detailed information.
Camber .25 deg pos caster 2.6 + .7 toe +20
found the anwer on Hyundai (www.hmaservice.com) Torque for the Castle Nut:NM(kg-m, lb-ft) (2000-2600, 148-192)
Hyundai Santa Fe wheels generally will not fit a Hyundai Excel due to differences in bolt patterns, offset, and wheel size. The Santa Fe typically has a larger diameter and different specifications compared to the Excel. Always check the specific wheel dimensions and compatibility before attempting to swap wheels between different models.
{| ! ADJUSTMENT ! PREFERRED ! RANGE | CASTER + 2.5° ± 1.25° CAMBER 0° ± 0.6° WHEEL TOE-IN 0° ± 0.25° |}