It depends on where an airbag located as well as brand and model of the car.
Airbag wiring typically varies in color depending on the manufacturer and the specific vehicle model. However, common colors for airbag wiring include yellow and orange, as these hues are often used to indicate safety-related components. It's essential to refer to a vehicle's service manual or wiring diagram for precise information regarding the airbag system's wiring.
It is important to understand why the warning lights come on. The airbag light will come on in any car if there is an issue with any airbag in the car, an issue with the wiring to or from the air bags, an issue with the horn, or the wiring of the horn.
Check the airbag ring wiring behind the airbag. does it turn on when you turn the wheel?
SRS (Supplemental Restraint System) related wiring is typically shielded using yellow insulation. This color coding is standardized to easily identify wiring associated with airbag systems and other safety features in vehicles. The use of yellow helps to prevent accidental disconnection or damage during repairs or maintenance.
Never probe airbag wiring with a power probe or multi-meter unless you have isolated the circuit by disconnecting both the airbag module and airbag component. As long as you have disconnected these you will be fine.
hi!its under passenger seat its a wiring loom
"What is the International color code for DC wiring?" "What is the International color code for DC wiring?" "What is the International color code for DC wiring?" "What is the International color code for DC wiring?"
The airbag light of a car won't go out if an error has been detected. This can be a defect in the airbag itself, the sensor, or the wiring.
Yes, the clockspring is part of the wiring of the airbag system. A faulty clockspring could keep the airbag from functioning.
wiring problem...easy to fix..no mechanic needed...
To replace the side airbag on a 2004 Mitsubishi Diamante, first disconnect the negative battery cable to prevent any accidental deployment. Remove the door trim panel to access the airbag unit, which may involve unscrewing bolts and unclipping connectors. Carefully detach the old airbag from its mounting points and unplug the wiring harness. Install the new airbag by connecting the wiring and securing it in place, then reassemble the door trim and reconnect the battery.
color code of car stereo wiring