the oil plug should be torqued down 18-20 inch pounds or a good snug by hand is just as good
NEVER torque the oil plug!! just snug it up with 10 lbs of pressure. take it from experience, its happened to me, i had to replace the oil pan.
For a 2001 Mazda Tribute, you'll typically use a 17mm socket for the oil drain plug. However, it's always a good idea to double-check, as some models may have slight variations. Make sure to use a ratchet or a breaker bar for better leverage when loosening or tightening the plug.
The oil drain plug on a 2007 Mazda Tribute is located on the underside of the engine oil pan. To access it, you typically need to lift the vehicle safely, either with ramps or a jack and jack stands. The drain plug is usually a hex or bolt type fastener, and it is positioned towards the rear of the oil pan. Always ensure the engine is cool before attempting to change the oil.
The oil drain plug torque is 65ft lbs
It is the amount of oil that the engine requires.
torque spec on the oil drain plug on a 2.9 ford ranger?
To install the oil pump on a 2001 Mazda Tribute, first, ensure the engine is cool and the battery is disconnected. Remove any components obstructing access to the oil pump, such as the oil pan and timing cover. Position the new oil pump in place, aligning it with the dowel pins, and torque the bolts to the manufacturer's specifications. Finally, reassemble any removed components and refill the oil before starting the engine to check for leaks.
I just did it. 5 qts.
2006 honda odyssey engine oil drain plug torque
The Suzuki oil drain plug torque specification is 30 pounds. Over tightening the oil drain plug can cause the oil pan threads to strip.
The 2004 Mazda Tribute has two different engines. The 4 cylinder engine uses 4.5 quarts. The 6 cylinder engine uses 5.5 quarts of oil.
how to change oil and filter on a mpv 2000 mazda