The check engine code P0420 indicates that the catalytic converter's efficiency is below the threshold set by the manufacturer, typically signifying a potential failure or a problem in the exhaust system. In a 1996 Toyota Camry with a 4-cylinder engine, "bank 1 sensor 1" refers to the upstream oxygen sensor located before the catalytic converter on the first bank of cylinders. This code may be triggered by a faulty oxygen sensor, a failing catalytic converter, or issues such as exhaust leaks. It's advisable to diagnose the specific cause to determine the necessary repairs.
Engine check light comes on, and you have the codes read.
A non firing engine can be caused by many things. A bad crank sensor or coil pack are the first two places to check for problems.
That is a oxgen sensor - fuel -air ratio sensor on Bank 1 sensor 1 This should be overed under warranty 3 yr 36,000 in most states. Calf 50,000
Go to the Camry dealership they should know.
Check the oxygen detector.
If a 1994 Camry will not go into park, check the speed sensor on the transmission. Also check the transmission itself to see if there is damage inside.
To turn off the check engine light on a 1999 Toyota Camry you can disconnect the battery. This will only reset the check engine light. So if there is a persistant problem with the engine, the light is likely going to stay on. To turn off the check engine light on a 1999 Toyota Camry you can disconnect the battery. This will only reset the check engine light. So if there is a persistant problem with the engine, the light is likely going to stay on.
You need to clean the throttle body also make sure that you check the air filter. If it does not help check if the throttle position sensor works properly.
The check engine light does not come on for an oil change.
Check the air filter box.
You need to check coolant temperature sensor and the water pump.
It's not supposed to be on. It comes on when engine reaches certain temperature. But if you see that temperature gauge is going in the red area you need to check the fan relay, its fuse, and the temperature sensor.