power seat motor and controls? Nope. i have manual seats, there is a big black plastic screw type thing on the right side of the seat cushion. I think it maybe a lumbar bar but when i screw and unsrew nothing happens. any ideas?
thanks
On the thermal housing
use a very long flat head screw driver with a hammer and a pair of plyers
there is a large metal staple type fastener on the frt of the knob that can be pulled out with a screw driver
where the headlight's adjustments screws for a 1997 Pontiac Sunfire are located
The starter solenoid, or ignition switch is bad, and either one needs to be replaced.
You should see a horizontal steel pipe just in front of the engine. This pipe has the bleeder screw.
There is an adjustment screw on the side of the throttle body that adjusts how open the throttle body sits.
remove the door panel and the window crank (if manual windows) , if auto windows remove the piece behind the door handle and unclip it from the buttons unscrew all screws around the door panel with a regular screw driver once you have done all that u will see the speaker remove it with a star head screw driver
There are small holes in the plastic housing just above the headlight with the hood open. You need to use a torx head screw driver. Insert torx head screwdriver and turn either direction for up or down. And the other hole is for left or right adjustments.
Jacl back end up. Remove anything in way. With crescent wrench remove copper hose. If you can get the whole filter to rotate, then pull off. unclip rubber hose with flat head screw driver. very easy.
with a screw driver it would help not hard to do use the brain
Replace the line, don't screw around with cheap fixes it ain't worth burning your car to the ground.