0
What else can I help you with?
How do you replace the starter on a 91 mx6?
3 bolts on starter, pull ,remove wires from start insert new starter and reattach wires and bolt into transmission
What would cause a Mazda mx6 not to start?
plenty of things could be a starter, alternator, ignition switch, bad spark...
Where do you put the transmission fluid in a 1993 Mazda Mx6?
I know if you have an auto transmission v6 Mazda mx6 93. You can put the transmission fluid in a 1993 Mazda Mx6 v6 from where you check the dip of transmission fluid. It is located close to the battery and close to the fuel filter. Its cap is orange color. For the manual transmission, you have to look under neath of the car, there is a bolt for drain and a bolt for to fill. Look around it, you will see it.
Where is the starter on a 1989 Mazda MX6?
the starter is near the driver's side front tire. there are 3 screws to take off which are very complicated. I ended up using a mechanic since he was able to find a cheaper starter for me anyways.
Where is the starter on a 1994 Mazda mx6?
found it, it's under the manafold in the back Specify that you were looking for the automatic transmission starter because the Manual transmission has the starter right below the battery and air filter 15mm bolts btw
Are the automatic and manual transmissions interchangable in the 82-92 mx6 gt probe gt Will the bolt holes lineupand everything?
Bolts and holes are identical
I am replacing the alternator on my 1994 Mazda MX6. I have got the alternator unbolted but I can not remove the alternator through-bolt because it hits the bulkhead. Is there a method to remove bolt?
You don't need to remove the bolt. The mounting bracket is slotted so that you only need to withdraw the bolt a small way and then pull the alternator and the bolt will come out through the slot.
Is 1993 Mazda mx6 moon roof interchangeable with 1995 Mazda mx6?
mx6 got no moonroof - only a sunroof and YES its interchangeable
Will a rx-7 rotary engine fit into a 94 mx6?
you can get it to fit but you will have to get all the engine brackets re-done and re-positioned in order for the engine to bolt in to a new engine bay
How do you change a starter on 1996 Mazda mx6?
To change the starter on a 1996 Mazda MX-6, first disconnect the negative battery terminal to ensure safety. Then, access the starter by removing any necessary components, such as the air intake or other obstructions. Unbolt the starter from its mounting, disconnect the electrical connections, and remove it. Finally, install the new starter by reversing the process, ensuring all connections are secure before reconnecting the battery.
Wheel offset mx6 Mazda?
stock wheels on the first gen mx6 is +44 for the 15x6 wheels.
Where is the location of starter relay on 1988 Mazda mx6?
The starter relay on a 1988 Mazda MX-6 is typically located in the engine compartment fuse box. To access it, open the hood and find the fuse box; the starter relay is usually labeled on the cover or in the owner's manual. If you have trouble locating it, refer to the wiring diagrams or service manual specific to the vehicle for more detailed guidance.
