85.00
Depends on the selling price, determined interest rate, and number of payments in the plan. There isn't one set answer to this.
The fuel filter is located under the rear seat in the 2003 Honda Civic. However, according to most service manuals for the Honda Civic, the fuel filter requires changing after about 200,000 miles - only sooner if using cut-rate fuels.
Not enough information. Is it turbocharged? Is it a piston engine? What type of fuel does it use? If you know its rate of fuel use and its efficiency you can find the power produced.
The answer depends on how the rate is measured.Consider the fuel efficiency rate for cars. Under the outdated Imperial system, it is measured as miles per gallon and the volume of fuel is the denominator. The SI definition is based on litres per 100 kilometres. So the distance travelled is the denominator.
The average rate of listening efficiency for most adults is 25%
Yes, you can replace the fuel pump in a 1985 Honda CRX Mk1 with an in-tank fuel pump from another Honda model, but compatibility is key. You'll need to ensure that the replacement pump fits the CRX's fuel tank and matches its flow rate and pressure requirements. Additionally, modifications to the wiring or fuel lines may be necessary depending on the donor vehicle. Always verify that the replacement part meets the specifications needed for optimal performance.
The fuel consumption rate for a 50-ton mobile crane can vary depending on several factors, such as the crane's engine efficiency, load capacity, operating conditions, and maintenance. On average, a 50-ton mobile crane can consume between 8 to 12 gallons of diesel fuel per hour during normal operation. It's important to consult the manufacturer's specifications and conduct regular maintenance to optimize fuel efficiency and ensure proper functioning of the crane.
Efficiency = (860.4*100)/(Heat rate in kCal/kWh) or Efficiency = (860.4*4.18*100)/(Heat rate in kJ/kWh) Ex 1: if heat rate is 2500 kCal/kWh, then efficiency is 34.416% Ex 2: if heat rate is 9000 kJ/kWh, then efficiency is 39.96%
Heat rate increases with a rise in gas BTU because higher BTU content in fuel typically indicates a more efficient combustion process, leading to increased energy output. However, as the energy density of the fuel increases, the system may operate at higher temperatures, which can lead to increased thermal losses and reduced efficiency. Additionally, if the power generation equipment is not optimized for the higher BTU fuel, it may struggle to convert the additional energy into usable power, resulting in a higher heat rate. Ultimately, the balance between fuel energy content and system efficiency dictates the overall heat rate.
The efficiency of a NaK pump operating with a 3 in, 2 out flow rate is 66.67.
The cost of replacing power window regulators (motors) in a 2004 Honda Accord is dependent on where one sources the parts from and which shop they take it to. A power window regulator runs approximately $240 to $265 from the dealership. However, the same part costs $174 to $191 from OEM Honda parts sites. As far as the cost of labour is concerned, count on the job taking approximately 3 hours and- utilizing a commonplace hourly labour rate of $80- the total would be about $240. The grand total would be approximately $500 to replace one power window regulator on a 2004 Honda Accord. Of course, it would cost more to replace multiple regulators.