0
The fuel pressure for a 1987 Suzuki Samurai typically ranges between 28 to 34 psi (pounds per square inch) when the engine is running. It's important to ensure that the fuel system is functioning properly, as incorrect pressure can lead to performance issues. Regular maintenance and checking of the fuel pump and filter can help maintain the appropriate pressure.
What else can I help you with?
How do you put an 87 suzuki samurai into 4 wheel?
Download the FREE Suzuki Samurai Shop Manual from http://www.suzukiinfo.com/ or visit zukikrawlers.com zn
What is the correct transmission fluid to use in a 87' suzuki samurai?
80w90 gear oil
If an 87 suzuki samurai only runs when you hold open the chock but fouls out the plugs what could be the problem?
Download the FREE Suzuki Samurai Shop Manual from http://www.suzukiinfo.com/ or visit zukikrawlers.com zn
Will a 1987 transmission from a suzuki samurai work in a 1988 samurai?
87 trans will fit 88 but not to sure about 88 1/2 and later models
Would an unadjusted accellerator pump on an 87 suzuki samurai cause high carbon monoxide readings?
No.
What is the procedure for towing a 87 suzuki samurai stick shift 4x4?
Leave your wife or girlfriend in the car.
How many front wheel bearings on each wheel of a 87 suzuki samari?
There are two taper roller bearings in each front hub, on a Samurai.
Where is the fuel pressure relief schrader valve on a 1994 Chevy truck?
From 87 to 95 did not have them. You will have to crack the fuel line alittle to relieve fuel pressure.
Why is your 87 suzuki samurai grinding and screaming in some gears?
well more than likely the clutch isnt going in all the way. you should try to tighten it.
What size bolt is 87 suzuki samurai bell housing.. also the clutch plate bolt size?
Oh, isn't that a happy little question! The bolt size for the bell housing on an '87 Suzuki Samurai is typically 10mm. As for the clutch plate bolts, they are usually around 8mm in size. Just remember, there are no mistakes, only happy little accidents in the world of DIY auto repair.
What is best fuel octane for suzuki ls 650?
What year bike? I use 87 in mine and I've looked into it like you are and everywhere I checked said 87 is the grade to go with.
What is the correct fuel pressure for a bronco?
if its a full size fuel injected bronco 87 or later the pressure should be between 35 and 42 psi
