The oil differential on a 92 Vigor typically refers to the difference in oil viscosity or type recommended for the vehicle compared to standard oils. For the 1992 Acura Vigor, it is generally recommended to use 5W-30 motor oil. However, the specific differential may depend on factors like driving conditions, climate, and personal preferences regarding synthetic versus conventional oil. Always consult the owner's manual for the most accurate information.
i had the same problem with oil leaking too, i tried all kind of stop leak. but only "lucas" oil stop leak worked, haven't leaked since. My 92 Vigor had the same issue. It was initially diagnosed as a leaking oil pan gasket. I brought it to Acura and was advised that the leak came from the oil filter adapter assembly seal and not the oil pan gasket. To access this part, the front differential assembly had to come off along with the return hoses.
My 92 Vigor has 5 clyinders
No.
The acura vigor does not have a block heater.
Oil leak behind the oil filter it has 3-#10mm bolts that holds it in place Again it's a 92 acura vigor. I need to know is it a gasket or a O-ring? Also is there anything on the back side of this cover plate?
Look for the same answer. where is the location of an 92 - 94 acura vigor flasher?
Under the intake madifult
there should be a square opening on the front differential cover. There, you can install a 3/8 inch ratchet. the plug itself is like a socket.
The drain plug for the engine oil in a 1992 Acura Vigor is located at the bottom of the oil pan. To access it, you'll typically need to lift the vehicle and locate the plug on the underside of the oil pan, which is usually a hex or square shape that can be removed with a wrench. Make sure to use a drain pan to catch the old oil when you remove the plug. Always ensure the engine is cool before attempting to change the oil.
The front bearings on an Acura Vigor are pressed on bearings, unless you have access to a press or know of a shop that can do this for you I wouldn't attempt this job.
I just did a full replacement of the Vigor Blower Motor. It took almost 12 hrs. Here are the instructions I followed to the letter. http://pw1.netcom.com/~gentile/Vigor/Timely1102.htm
Its on the oil filter adapter housing and hard to get to.