0
The spark plug gap for a 2006 Mitsubishi Lancer typically ranges between 0.028 to 0.032 inches (0.7 to 0.8 mm). It's important to check the specific engine type and model, as gaps can vary slightly. Always refer to the owner's manual or manufacturer specifications for the most accurate information.
What else can I help you with?
What is the spark plug gap on a 2002 Mitsubishi Lancer?
02 lancer gaplook under the hood of your lancer for the specs, but the gap is .039-.042. With platinum plugs, a spark plug gap isn't necessary.
What is the spark plug gap on 2004 Mitsubishi Lancer 2.4 engine?
The spark plug gap on 2004 Mitsubishi Lancer 2.4 engine should be set between .7 and .8 mm. A new spark plug may be purchased for this vehicle at any auto parts retailer.
What is the spark plug gap on a Mitsubishi lancer 1998 coup gli?
The spark plug gap on a 1998 Mitsubishi Lancer Coupe Gil should be set between .039 and .043 inches. This gap specification was set by the manufacturer.
Spark plug gapping for 2004 Mitsubishi lancer es?
it should say on the sticker under the hood
Does a 2003 Mitsubishi lancer need a specific spark plug?
No, any platinum plug will do. And with platinum plugs, no gap info is necessary.
Where are the spark plugs on a 2005 Mitsubishi lancer es?
On a 2005 Mitsubishi Lancer ES, the spark plugs are located on the engine cylinder head, beneath the ignition coils. To access them, you'll need to remove the engine cover and then detach the ignition coils from each spark plug. Once the coils are removed, you can unscrew the spark plugs using a spark plug socket.
What is the spark plug gap setting on a 1996 Mitzi lancer MR 1600 mivec?
The spark plug gap for a 1996 Mitsubishi Lancer MR 1600 mivec should be set between 1.0 and 1.1 mm. A new spark plug will not need to be gapped as they are gapped at the factory.
Changing the spark plugs on a 2006 galant?
how to change number 6 spark plug on a 2006 mitsubishi galant
What spark plug does Mitsubishi lancer uses?
The Mitsubishi Lancer typically uses NGK or Denso spark plugs, with the specific part number depending on the engine variant and model year. For example, many models with the 2.0L engine use NGK IFR6A-11 or Denso K20PR-U11 plugs. Always consult the owner's manual or a parts specialist to confirm the correct spark plug for your specific Lancer model.
Where is cycliner 3 located on a 2006 Mitsubishi Endeavor?
Front and middle spark plug.
How do you change spark plugs on a 2000 Mitsubishi Lancer?
To change the spark plugs on a 2000 Mitsubishi Lancer, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or spark plug wires to access the spark plugs, then use a spark plug socket and ratchet to unscrew and remove the old plugs. Check the gap on the new spark plugs, install them carefully, and torque them to the manufacturer's specifications. Finally, reconnect the ignition components and the battery terminal.
How do you change spark-plugs in 2005 Mitsubishi lancer?
To change the spark plugs in a 2005 Mitsubishi Lancer, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or spark plug wires by gently pulling them off the spark plugs. Use a ratchet and spark plug socket to carefully unscrew the old spark plugs, then install the new ones by hand to avoid cross-threading. Finally, reconnect the ignition coils or wires and the battery terminal.
