What is the valve clearence for a 1985 lt 125
Yes, the 1983 LT125.
Suzuki is a manufacturer of motorcycles, motocross bikes and 4 wheelers. Suzuki started making 4 wheelers in 1983 with the introduction of the Suzuki LT125.
The valve clearance for a 1983 Suzuki LT 125 is typically set between 0.05 mm (0.002 inches) and 0.08 mm (0.003 inches) for both the intake and exhaust valves. It's important to check and adjust the valve clearance periodically to ensure optimal engine performance and prevent potential damage. Always refer to the service manual for the most accurate specifications and procedures.
The spark plug gap for a 1983 Suzuki LT125 is typically set to 0.024 to 0.028 inches (0.6 to 0.7 mm). It's important to measure the gap with a feeler gauge and adjust as necessary to ensure optimal engine performance. Always refer to the owner's manual for specific recommendations and maintenance guidelines.
0.05mm
The valve clearance for the 1983 Yamaha Virago 500 is 7.2 mm. The exhaust valve lift is 7.7 mm. The vehicle gets on average 51 miles per gallon.Ê
the valve lash for a 1985 Mazda 2.2 diesel is .012 in under cold conditions
To adjust the valves on a 1983 Nissan Datsun 200SX, first ensure the engine is cold. Remove the valve cover and use a feeler gauge to check the clearance between the rocker arm and the valve stem for each cylinder. Adjust the clearance by loosening the lock nut on the rocker arm and turning the adjustment screw until the correct clearance is achieved, then retighten the lock nut. Repeat this for all cylinders, then reassemble the valve cover.
Suzuki Cultus was created in 1983.
Anna Suzuki was born in 1983.
Kurt Suzuki was born on October 4, 1983.
Hiroki Suzuki was born on October 3, 1983.