no there nothign wrng with it unless it make noise and it doesnt move then u need a new motor for the seat or could be the switvh itself
there is a rattling noise in the area of the serpentine bell
Bad wheel bearing.
I COULD BE THAT IT IS NOT LINED UP, NEEDS SHIMMS
What you are hearing is probably the compressor for the load-levelling shocks in the rear of the car. That sound is normal.
Check the belts. The most common cause of squealing is a worn or loose belt on the front of the engine.
Check your wheel bearings. Mine made a noise when turning right and had to replace the wheel bearings and hubs as they are all one unit on my 92.
You may have problems with your brakes' master cylinder. Have it checked by a mechanic.
When I use the signal it makes lot of noise
Replace the switch.
Most likely,your CV axle(s) are bad. You will need to replace the axle(s).This happens as the vehicle gets more miles on it.
Possibly worn CVC joint. Have the CVC joints inspected. It might be that your motor mounts are broked and the motor is lifting up and slaming back on the chasey
check your wheel barrings i just had the same problem on my buick lesabre jack up your car untill the wheel is off the ground and grab the tire and shake it if there is alot movement when you do its probably the wheel barring it is pretty easy to replace if that is what is wrong with it get a chiltons it will help alot :)