0
What else can I help you with?
1995 aurora when you press on the gas at idle it goes past 2 rpm and will not come back down someone help please?
Perhaps throttle plate (in throttle body) is sticking Also could be the throttle position sensor or the idle position sensor and could be the throttle cable --if you have used any fuel enhancers it gums up the throttle position sensor and it will stick. Had the same issue with 1996 -its the senors in your transmission-has 2 -need to put on diagnostics for which is causing it and then to replace parts -approximate cost for for part 60.00 cad -labour 1200.00 to 1600.00
Cadillac 4.9 How do you install a throttle position sensor?
The throttle position sensor is on the back of the carberator. Held in with two star bolts. Unscrew them and put your new sensor into place. Note the position of the old sensor. very tight space. little room to work. but its managable without removing any other parts.
What is the cost to replace a throttle position sensor for 2004 Kia Sedona?
The cost to replace a throttle position sensor for a 2004 Kia Sedona typically ranges between $100 and $300, including parts and labor. The sensor itself usually costs between $30 and $100, while labor charges can add another $70 to $200 depending on your location and the shop's rates. It's advisable to get quotes from multiple mechanics to ensure you're getting a fair price.
What is a TBS for a Jeep Wrangler?
If you mean TPS, that is the throttle position sensor. In a 1994 Wrangler, it is located on the driver side near the firewall. It has two parts, the sensor and the plug.
Your jeep Cherokee starts fine but will not keep an idle?
Its possible that it is the TPS sensor (throttle position sensor)easy to replace yourself and available at your local parts store.It could also be a transmission issue, change the fluid and filter, but start with the TPS sensor its a common problem and cheaper solution
Were is the throttle position sensor located on 2000 ford mercury villager?
The TPS is located on the back side of the throttle body. Like all other sensors on the Villager, hard to see, almost impossible to get at to replace. I would suggest obtaining a repair manual at your local parts store.
Your 2000 Toyota Celica starts to idle then cuts off completely and wont stay running unless you give it gas Any suggestions?
you may look into what is called a throttle position sensor. it basically monitors the position of the throttle and tells the fuel injection what to do. if it goes bad, the car will stall and won't run unless you give it more gas to keep the rpm's up. the throttle position sensor is typically located on the side of the throttle body, right near where the air intake hose joins the engine. they are relatively inexpensive , available at any car parts store and easy to replace.
Were is the throttle position sensor on 2007 Chevy Tahoe?
The throttle position sensor (TPS) can be found as part of this vehicle throttle body (TB) assembly. The TPS will be screwed into the TB via screws and is attached by a quick release wiring harness. Additional sensors and parts to be found on or near the TB include the idle air control (IAC) and idle air temperature (IAT).
Where is the throttle position sensor on a 1987 Honda accord?
Its on the throttle body, back side (firewall side). Its on the passenger side of the car, where the plastic intake from the air filter hooks on to the aluminum part. Mine has a gold finish, and is a small round 'can' shape. Here is the fun part, it is riveted on to the throttle body, and is not intended for 'backyard' replacement. I haven't been able to find one for sale (haven't checked with the dealer yet), the aftermarket parts stores tell me I need to buy the entire throttle body, not just the sensor. Its also been referred to as a throttle angle sensor. When I had my 87 Honda in for service for a different problem, they said my PGM-FI light was on because of a bad throttle position sensor. I am still driving it howerver. I notice it stumbles a little on acceleration, perhaps this is why, I don't know. I found a used throttle body on the internet for $154. I don't know yet if that includes the throttle position sensor or not.
What is a position sensor used for?
A position sensor is used to tell the position, such as a position sensor used in some cars to aid parking. Similarly, a position sensor may be used in ultrasounds, to identify the position of body parts.
How do youreplace the cam position sensor on Porsche boxster?
To replace the cam position sensor on a Porsche Boxster, first disconnect the battery to ensure safety. Locate the cam position sensor, usually situated near the camshaft, and remove any necessary components for access. Unplug the electrical connector from the sensor, unscrew it, and replace it with the new sensor. Finally, reconnect the electrical connector, reassemble any removed parts, and reconnect the battery.
You own a Toyota Camry that has a choking down sound when at a complete stop but never chokes down?
Try cleaning the throttle body (you can get throttle body cleaner in virtually any auto parts store), looks like you have problems with idle control valve to throttle position sensor. Both of them are located at the throttle body.
