0
What else can I help you with?
Which way do you turn bolt to drain oil in 2003 trailblazer?
Counterclockwise.
Where is the bolt to drain the oil from the pan on a 2003 dodge stratus 4 sxt?
you can find the drain plug in the center of the oil pan
Where is the oil drain bolt on a 2004 Toyota Rav4?
Where is the oil drain bolt on a 2004 Toyota Rav4?
Where is drain plug on a honda foreman 400 2003?
On a 2003 Honda Foreman 400, the drain plug is located on the bottom of the engine, typically on the left side. It is a hex bolt that you can remove to drain the engine oil. Make sure to place a drain pan underneath to catch the oil when you remove the plug. Always check your owner's manual for specific details and recommendations.
How do you drain the oil a 2005 C320 Mercedes Benz?
You can drain it from the bottom. You will need to remove the bottom under panel, should be 6 8mm bolts, then you can see the drain bolt, remove the drain bolt and you can drain the oil.
Where is the NV5600 Tranny drain plug or do you have to pump out the old oil when changing?
Remove the lower bolt in the pto cover to drain.Remove the lower bolt in the pto cover to drain.
For a 2003 Pontiac Aztec where is the radiator drain so you can flush the coolant system?
you have to take off the cover then it is on the driver side, plastic butterfly bolt
Where is the oil pan drain plug on a 2003 Chevy Tahoe?
The oil drain plug is on the bottom of the oil pan. It is a hex bolt about 1/2" hex turn it counter clockwise pushing in until it is unscrewed then pull away fast to let the oil drain.
Where is the oil drain plug 2003 town and country?
It's on the oil pan. Bottom of the engine. Crawl under it and it will look like a bolt in the oil pan.
What is the bolt pattern on a 2003 Cadillac deville?
Bolt pattern on a 2003 cadillac deville
Could you please tell me the torque setting for Suzuki gsxr750 k7 oil drain bolt?
16.5 ft lbs. Suzuki Oil drain bolt
How do you change rear oil in ford ranger?
there should be a drain bolt on the lower front or rear section and a bolt on the top remove the top bolt and put the drain bolt on the bottom back in and fill the case from the top bolt untill fluid runs out and screw top bolt back in and hit the road
