32mm
The front hub takes a 35mm deep socket. (It is not necessary to remove the hub to change the rotor.)
it is a 29 mm hub nut socket
32mm
The hub bolts use a 14mm twelve point socket.
T-55 Torx Socket (DO NOT USE AN ALLEN WRENCH) - To remove the 3 bolts that secure hub assemble to steering knuckle. 1 -3/16 deep socket - To remove axle spindle nut.
36mm
The rear hub nut socket size for a Skoda Fabia is typically 30mm. However, it's always best to check the specific model year and variant, as specifications can vary. Using the correct size socket is essential to avoid damaging the nut or hub during removal and installation.
You will need a 35 mm socket.
it is a 22m socket
35mm
I've read that it's 36mm.
36 mm will fit the axle hub nut.