answersLogoWhite

0

The turn signals on a 2000 Mitsubishi Mirage may stop working due to several issues, including a blown fuse, a faulty turn signal relay, or defective bulbs. Additionally, problems with the wiring or a malfunctioning switch on the steering column could also cause the signals to fail. It's important to check the fuses first, as they are often the simplest and most common cause. If the fuses are intact, further diagnostics of the relay and switch may be necessary.

User Avatar

AnswerBot

2w ago

What else can I help you with?

Related Questions

What would cause both the blower fan and the air conditioning to stop working in Mitsubishi Mirage 1998?

The blower fan and air conditioning in a 1998 Mitsubishi Mirage may stop working due to a blown fuse, which can interrupt power to both systems. Another possible cause could be a faulty relay or switch, preventing electrical signals from reaching the blower motor or A/C compressor. Additionally, issues with the climate control module or a malfunctioning wiring harness could also impact both components. It's advisable to inspect these elements to diagnose the issue accurately.


What is the cause of vibration and noise in Mitsubishi Mirage'01 when you go 70mph or faster?

Warped rims or discs


What is the cause of the horn not working on a 2001 mirage?

I would check and see if it has a blowed fuse first.


Why don't my Gauges work on my 1997 Mitsubishi mirage yet in the morning with the moisture the gauges work for a few minutes?

Your gauges might not work on the 1997 Mitsubishi Mirage because of exposed wires or a short in the wiring. This could cause the problem when there is moisture or a lack of moisture in the panel. You might also have a faulty fuse.


What would cause a 1996 Mitsubishi Galant to have no heat?

heating element stopped working


What would cause the navigation system to stop working in a 2007 Mitsubishi endeavor?

what would cause my navigation system to quit


How do you fix horn that doesn't work in a 2001 Mitsubishi mirage?

To fix a non-working horn on a 2001 Mitsubishi Mirage, first check the fuse related to the horn in the fuse box, as a blown fuse is a common cause. If the fuse is intact, inspect the horn itself for any physical damage or corrosion. Next, test the horn’s relay and wiring connections for continuity. If all components are functioning properly, the issue may lie in the horn switch on the steering wheel, which may need replacement or repair.


What are the symptoms of failing throttle position sensor in Mitsubishi Mirage Car will not idle when warm.?

A failing throttle position sensor will cause idling problems when the car is warm. The failing sensor can also cause the car to stall when idling.


What would cause both turn signals to stop working and then start working again?

Faulty light bulbs, damaged engine.


Did a full tune up and replace distributor has spark but will not start. it's a 1994 Mitsubishi mirage?

A bad fuel pump will cause your automobile not to start. Everything will work fine, except the fuel injectors do not have any fuel.


Why would the tail lights wipers and dash lights all stop working at the same time on a 96 Mitsubishi mirage and i checked all the fuses and they are all good so any suggestions?

If the tail light wipers and dash lights all stopped working simultaneously on your 1996 Mitsubishi Mirage despite the fuses being intact, the issue could be related to a faulty ground connection or a wiring problem. Check the ground wires for corrosion or disconnection, as poor grounding can lead to multiple electrical failures. Additionally, inspect the switch or relay responsible for these components, as a malfunction there could also cause them to stop functioning together. If the problem persists, consider consulting a professional for a more thorough diagnosis.


How can a mirage cause a problem?

It probably looks real