They started going black in late 2005 models.
Go to Autozone, tell them the car year, make, model etc. They will give you the right number for the headlight; even if you don't buy them there.
If the headlights on your 1991 Mazda Miata won't go up or down, it could be due to a blown fuse, a malfunctioning headlight motor, or a wiring issue. First, check the fuse box for any blown fuses related to the headlights. If the fuse is fine, inspect the headlight motors and their connections for any signs of damage or corrosion. Additionally, ensure the headlight switch is functioning properly, as a faulty switch may prevent the headlights from operating.
It will be the headlight switch itself has worn contacts and just needs the assembly replaced in most cases.If you jiggle or move the switch arm to make them come back on this pretty much means that is the problems no matter the year truck.It will not be the headlight relay or fuses.Mazda can tell you what part to replace unless you do not know how to fix things of this mechanical repair.Ok
If you go to this website, at the bottom there are is a drop down list where you choose he model and year of your Mazda. http://www.mazdausa.com/MusaWeb/displayManualsByModelAndYearHome.action
Mazda was founded in 1920, originally as a manufacturer of cork products. The company's first vehicle, the Mazda-Go, was produced in 1931. Mazda has since evolved into a well-known automotive brand, recognized for its innovative designs and technology.
what causes 2003 corvette headlight to not go down
if you open the front trunk then you will have to rip off the side carpet you don't really rip it if you see it coming off you have to let go you will see a little black bolt you will have to twist it clockwise the headlight will pop open but you still have to twist it for a few more seconds there's also a long black thing in the headlight position that cause the headlight to pop open under the old headlight is a lever to make it pop out if you get the new headlight you will have to slide it in real softley there's also three jabs to make it stay in there. this is how to change a headlight on the porsche 911 996 and boxter 986
you open the bonnet and then you go to the back of the headlight and youll see a wire and clip attached to the black casing unclip that wire and then unscrew the black plastic screw then youl have a clip unclip it and then pull out your light bulb and then put a new one in and put the clip back on and
I was in a 2 year relationship with a black girl, I am now with a white girl. I went black, and came back.
If the manual is the same as the 2007 Mazda 3, its pretty comprehensive. Basically pull the rubber booty, twist the bulb, remove the bulb. There is a sub-assembly attached to the bulb that you have to remove and put on the new bulb. Attach the wire, twist into the housing, put the rubber booty back on...you're good to go. See sources and related links for headlight bulb info. I upgraded to the Solux bulbs and they're really nice.
9004 for main headlights. H3 (35watts) for foglights located next to headlights. To change passenger-side headlight, remove the airfilter box, disconnect the headlight socket, unscrew the black ring that secures headlight bulb. To change the driver's side, repeat the same procedures.
No model, no year, and no engine size listed. No way to give an answer.