0
What else can I help you with?
How do you adjust the idle on a 1986 Honda Accord LX?
The idle for a 1986 Honda Accord is adjusted by a idle air control valve. These function by either tightening or loosening the valve. This controls how much air is allowed into the system, more air means higher idle and less means lower.
What is valve clearance for 1986 Honda Nighthawk motorcycle?
Intake valve .003, exhaust valve .005.
What is the valve clearance of a 1986 Honda fourtrax 200 sx?
.003 in
Where is the IAT sensor in a 1986 rx7?
on drivers side of engine below bypass air control valve near oil fill cap two wire connector.
What are the valve settings for a 1986 Honda accord LX?
Valve clearance (cold) Intake 0.005 to 0.007 in Exhaust 0.010 to 0.012 in
Where is the fuel control cut off unit in an 1986 Honda Accord?
The fuel control cutoff unit, in your 1986 Honda Accord, is located on top of the fuel injector pump. The fuel control cutoff unit is contained in a sealed box.
Where is the 02 sensor located on a 1986 Honda Prelude?
On a 1986 Honda Prelude, the O2 sensor is typically located in the exhaust system, specifically on the exhaust manifold or just downstream in the exhaust pipe. It is usually positioned before the catalytic converter. To access it, you may need to raise the vehicle and potentially remove any heat shields that cover the sensor.
What is the valve clearance adjustment for a 1986 Honda TRX 200 SX?
my clymer states 0.08mm (0.003in) intake and exhaust
Where is the reserve switch on a 1986 Honda 1100 Shadow?
If you mean a reserve fuel switch, there isn't one. just a shutoff valve.
Has anyone found a replacement hot water control valve assembly for an 86 Corvette?
http://www.ecklerscorvette.com/corvette-hot-water-control-valve-for-cars-with-air-conditioning-1986-1987.html
What is the valve clearance settings for a Honda acty 1986?
Cold settings are Inlet 0.12-0.18 mm Exhaust 0.15-0.18 mm
What is the valve clearance for a 1986 Honda Fourtrax 125?
cold intake is 0.003 in or .07 mm cold exhaust is 0.003 in or .07 mm
