The 2002 Acura airbag control module is located on the firewall in the engine compartment. The airbag control module will be on the drivers side of the firewall.
Under the dash
where is the ignition module located ina 2000 integra acura
The DRL control module is located under the steering column on the left hand side!
I sent my original module to a company i found on google - www.myairbags.com They reset it for $55 and shipped back to me for free!
Under the dash. Mounted to the firewall. There's a red flashing light on the bottom side of it.
Inside of the car, behind the glovebox,
The fan switch on a 1995 Acura Integra is located on the dashboard. It is a part of the temperature control system.
yes, if you have the correct harness for the module for that setup.
The sensor senses when the engine is pinging or called spark knock. It then sends a signal to the engine control module. The engine control module then temporarily retards the timing until the pinging stops.
The 1991 Acura Integra idle air control valve can be found on the firewall. The valve will be on the drivers side of the firewall.
Fuse for cruise control on a 1994 Acura Integra is found in the engine bay fuse box. The fuse is located in the slot labeled CRUISE.
The PGM-FI unit is located under carpet at the passenger side. It covered by frame. Good luck. The ignition control module of any late model Honda/Acura product is always the PGMFI computer, which controls all fuel delivery and ignition timing coordination. Now, if you have a problem, that is ignition related, first replace the plugs, then the wires, and shortly after the ign coil itself. That's how you approach a Honda ign prob.