under dash left side bolt to firewall with bracket tcm and seperate bcm boxes
the lights come on to let you know that your car is locked
To reset the oil change sensor on a Hyundai Tiburon, first, turn the ignition key to the "On" position without starting the engine. Then, press the gas pedal three times within ten seconds. After doing this, the oil change light should reset. Finally, turn off the ignition and start the engine to confirm that the light has been cleared.
Owners manual says: with filter change 4.5 U.S. qts. (4.3 liter) without filter - 4.2 U.S. qts. (4.0 liter)
You cant chance the spark plugs with out removing the manifold sorry dude i have tried every possible way there is and its not going to happen :(
Sometimes, if your keys have an electronic fob and someone you know has another one that opens your vehicle, the car can be unlocked by that person pushing their fob's unlock button into a cell phone while you hold your cell phone up to the lock of the car.
On my 2001 Elantra GT the filter is internal and not changeable without a rebuild. All you can do is have it flushed and refilled.
this could be because of a faulty body control module, BCM, they are about $950 from the dealer and all your relays are built into it for me my blinker just stays on all the time with the car on or off call Hyundai of North America file a claim if enough of us do this we will get our money back on the part and or get a new up dated one without the flaw the number is 1-800-633-5151
no it's located in the tank
Shag It Nad it will get horny and it willll e fixed
You can cut the ends off of the wires and replace them with aftermarket ends. Check at your local parts store.
The cooling fan temperture relay is stuck closed. Replace the replay.
The fuel pump located in the gas tank.You need remove the tank for change.