The ecm is located on the passenger side behind the plastic kick panel at the floor mat.It has three plastic screws on the kick panel which is right at the blower motor housing for reference.
where is the ignition module located on a 1988 Mazda b2200
A Mazda B2200 engine with carburetor has 85 horsepower, and with fuel-injection has 105 horsepower.
The Mazda B2200 truck body did not change much, if at all between 1986 and 1993. There should be no differences in the shape of the engine compartment. -Kyrasis6 Owner of Mazdatruckin.com
no
All mazda b series with a b2000 or b2200 are a NON interference engine.So in short if your timing belt broke it will not damage the engine.
yes you can its a straight swap you don't even have to change engine mounts
No. The 1994 and later Mazda B-series pickups are re-badged Ford Rangers. The 2.5 liter engine in them is an improved 2.3 liter engine that's been in Fords for many years. The Mazda B2200 uses a Mazda-designed engine that's fully different. Best bet is to go with a Mazda B2600i engine, or sell the pickup and buy something else. The i in B2600i stands for fuel injection, which increases power and gas mileage and reduces the amount of emission control equipment needed, simplifying the engine compartment.
No
i have a b2200 Mazda 1993 and everytime i brake a clicking noise come out of the passenger side like in the back of the seat at the same time the brake pedal moves down with each click what can that be.
where is the fuel pump on a 89 Mazda b2200
A 1995 KIA Sportage 2.0L 16v DOHC will bolt right into the B2000 and the B2200. You will have to get a system called megasquirt from www.diyautotune.com Your Horse Power will be almost double that of the B2200 2.2L SOHC
where is the EGR valve on a 1989 mazda b2200