0
What else can I help you with?
Where is the engine coolant temperature sensor for a 91 Acura Legend?
go to acura-legend.com search the forum
Where is the engine coolant temperature sensor on a 1996 Acura Integra?
if you look just under the distributor you will see where from right to left you have a radiator hose, heater hose, then two sensors, the sensor furthest to the left is your coolant sensor, I was troubleshooting mine earlier and started the car with it disconnected i got check engine light with p0118 (coolant temp sensor) so there ya go
Where is the oil temperature sensor located on the 91 Acura Legend?
The 1991 Acura Legend does not have an oil temperature sensor. It does have an oil pressure sensor. The oil pressure sensor will be located on the left-hand side of the engine.
Where is coolant temp sensor 95 acura?
In a 1995 Acura, the coolant temperature sensor is typically located near the thermostat housing, which is usually found on the engine block. It may be positioned on the cylinder head or intake manifold, depending on the specific engine model. To access it, you might need to remove some components, so refer to the vehicle's service manual for precise guidance.
IAT sensor 1999 Acura TL 3.2?
The IAT sensor on a 1999 Acura Tl is located inside the air box. The sensor reads the temperature for the air that enters into the engine through the intake system.
When to change coolant in 2005 Acura TL?
My ACURA mechanic said @ 125,000 miles to change the Engine Coolant in my 2005 Acura TL.
Where is the Acura RSX fan switch sensor?
The Acura RSX fan switch sensor is typically located near the radiator or on the engine's coolant outlet. It is designed to monitor the coolant temperature and activate the radiator fan when necessary. To access it, you may need to remove some components for better visibility, depending on the specific model year. Always refer to the vehicle's service manual for precise information and guidance.
Where is the intake air temperature sensor on your 95 acura integra?
The intake air temperature sensor is located on the mass airflow sensor in the engine. It is in the engine's air cleaner's cover. Since it is electrical, one must disconnect the battery before touching or removing it.
Where is the oil temperature sensor located on a 1991 acura integra?
it is located on the firewall side of the engine to the left of the oil filter
How do you replace a knock sensor for an acura tl 2000?
Disconnect the negative battery cable.Drain the engine coolant into a suitable container.Unplug the sensor connector.Using the proper size socket, loosen and remove the knock sensor.To install:Carefully thread the sensor into the engine block.Tighten the sensor.Attach the sensor connector.Refill the engine coolant.Connect the negative battery cable.
Need help in locating IAT sensor on a 91 integra ls 2dr?
The IAT sensor, or intake air temperature sensor, is located on the tubing the of intake on a 1991 Acura Integra. This sensor reports the temperature of air coming into the engine directly to the ECU.
Where is the intake air temperature sensor plug located on the 1997 Acura RL?
The 1997 Acura intake air temperature sensor is located on the air filter housing. The sensor will be on the right hand side of the air filter housing.
