In a Nissan Titan, the heater fan motor is typically located inside the dashboard, behind the glove compartment. To access it, you usually need to remove the glove compartment and possibly some surrounding panels. The fan motor is usually mounted on the HVAC (heating, ventilation, and air conditioning) assembly. Always refer to your vehicle’s service manual for specific instructions and safety precautions.
Remove the wiring harness from the back of your heater fan motor. Remove the heater fan motor retaining bolts. Remove the fan from the front of the heater motor. Reverse the process to install your new heater motor.
Remove the wiring harness from the back of your 1994 Chevy heater fan motor. Remove the heater fan motor retaining bolts. Remove the fan from the front of the heater motor. Reverse the process to install the new heater fan motor.
under the passenger side dash beside the heater fan
first of all i hate to say an obvious answer but does the heater motor even turn. Does it blow air at all. The first thing i would check is if the fan motor is blowing any air at all. If not u need to put in a new heater fan motor. first of all i hate to say an obvious answer but does the heater motor even turn. Does it blow air at all. The first thing i would check is if the fan motor is blowing any air at all. If not u need to put in a new heater fan motor.
If a heater fan is not working on a Toyota RAV4, the problem might be with the blower motor resistor. The blower motor resistor is either on the firewall next to the heater motor or in the dash on the passenger side above the heater core.
Possibly the Heater Motor, if the fan is not coming on at all the bearing in the motor have probably gone out.
Why does your 2001 Nissan Pathfinder heater fan stay on high even after I try to shut it off?"
I think the person means the heater blower motor and not a radiator fan motor
How do you replace the fan motor on a jeep cheerkie
heater motor is gone
You can replace the heater fan motor .......remove glove box, four screws hold it in.......then remove screws from motor and drop it down out of the housing.
Most likely your fan blade mechanism inside heater motor is discounted from motor, or loose from motor.