standing in front of the car on the left hand side by the engine it should be grey, remove the cap and plug in the obd1 reader. hope this helps.
Where is the obd1 plugin on a 1993 acura legend
Acura Legends do not have obd2 plugs. They are all OBD1.
The 1995 Acura Integra is OBD1. There is no connector if you are looking for one.
behind the brake booster
obd not available until 1996
A 1991 Acura Integra is classified as OBD1 (On-Board Diagnostics version 1). This system was introduced in 1991 and continued until 1995 for most Honda and Acura models. OBD0 was used in earlier models, primarily from the late 1980s to 1990.
A 1991 Dakota is not OBD2 compliant. It is OBD1, and the diagnostic connector is under the hood on the wiring harness on the passenger side firewall.A 1991 Dakota is not OBD2 compliant. It is OBD1, and the diagnostic connector is under the hood on the wiring harness on the passenger side firewall.
YES, all vehicles prior to 1995 were OBD1.
The OBD1 plug for a 1993 Acura Integra is typically located under the dashboard, near the driver's side. You can find it near the steering column, often attached to the lower part of the dashboard. Look for a rectangular connector with multiple pins, usually covered by a plastic cover. This is where you can connect an OBD1 scanner or jumper wire to troubleshoot the vehicle.
There is none. This is an OBD1 vehicle.
its obd1
located directly under the shiftboot and cover where.