behind the brake booster
A 1991 Dakota is not OBD2 compliant. It is OBD1, and the diagnostic connector is under the hood on the wiring harness on the passenger side firewall.A 1991 Dakota is not OBD2 compliant. It is OBD1, and the diagnostic connector is under the hood on the wiring harness on the passenger side firewall.
The EEC test connector is in the engine compartment in front of the power distribution box (Helpfull)
Near the left hand ( drivers) strut tower.
standing in front of the car on the left hand side by the engine it should be grey, remove the cap and plug in the obd1 reader. hope this helps.
where is the obd connection point on a 1992 thunderbird OBD1 is usually under hood by battery
The OBD1 connection on a 1989 Ford Festiva is located under the dashboard on the driver's side. It can typically be found near the steering column or to the left of the brake pedal. Look for a rectangular connector with several pins, which is used for diagnostic purposes.
attached to the steering coloum , about halfway down, it has a small plastic cover over it
There is none. This is an OBD1 vehicle.
its obd1
located directly under the shiftboot and cover where.
The 95 Conti has no OBD1 plug. The vehicle is equipped with the OBD2 system with the port under the steering wheel.
What does a code 212 mean on a OBD 1 mustang