it is the only one on the oil pan.
1987 Suzuki Truck Samurai 1.3L 2BL SOHC 4cylThe Spark Plug Gap.032 (In thousandths of an inch)
Download the FREE Suzuki Samurai Shop Manual from http://www.suzukiinfo.com/ or visit zukikrawlers.com zn
Bottom of Oil Pan.Cheers Joseph
The Suzuki oil drain plug torque specification is 30 pounds. Over tightening the oil drain plug can cause the oil pan threads to strip.
what is the spark plug gap size for a 1987 suzuki savage 650?
The size of your mom
The correct spark plug gap for NGK plugs in a 1987 Suzuki Samurai is typically set at 0.028 inches (0.7 mm). It's important to verify this with the vehicle's service manual or manufacturer's specifications, as variations may exist based on engine modifications or conditions. Always ensure the gap is adjusted properly before installation for optimal engine performance.
remove the drain plug between the exhaust under the motor
Spark plug gap is 0.028 to 0.031 inch or 0.7 to 0.8 mm
To add gear oil to a 1987 Suzuki Samurai's standard transmission, locate the fill plug on the transmission case, which is usually on the side. Use a socket wrench to remove the plug, then pour the appropriate gear oil (typically GL-4) into the fill hole until it reaches the bottom of the plug opening. Reinstall the plug securely after filling. Always consult your owner's manual for specific oil specifications and capacities.
The transmission fill plug on a 2000 Suzuki Alto is behind the drain plug. Both the plugs are located underneath the transmission.
17mm