The pressure switch is located on the back of the Power Steering pump which is on the passenger side of the car at the rear of the engine. You can reach it from top or bottom but I found, to take it out it is easier to reach from under the car. It is the only part of the power steering pump that has a wire going to it.
Power steering pressure switch.Power steering pressure switch.
Were are wires for Mitsubishi 3000gt oil pressure switch
Remove the wiring harness from the 2003 Jeep Liberty pressure switch. Remove the power steering pressure switch retaining screws. Reverse the process to install the new power steering pressure switch.
The power steering pressure switch, on a 1993 Chrysler New Yorker, is located below the power steering pump. The pressure switch is attached to the power steering reservoir mounting bracket.
The Honda Odyssey power steering pressure switch is located on the firewall in the engine compartment. The pressure switch will be on the drivers side of the firewall.
Power steering power steering pressure switch is a part of power steering pump. There is wire harness connect to the pump, it's connect the switch. Find the harness you will find the switch.
It is on the power steering pressure hose.
were is the power steering pressure switch on a 1988 oldsmobile cutlass 2.8 engine
It is located on the pressure line.
The power steering pressure switch screws in. Simply unplug the wire harness, unscrew the old switch and screw in the new switch. Plug the wiring harness back in.
A 1992 - 1995 Power steering switch can be found for sale on the internet for about 100$
My 2004 Endeavor does not. However, I like the idea, and the lights turn off when the ignition switch is in the lock position, so I leave the headlights on all the time.