0
What else can I help you with?
What is the oil capacity 2004 Mazda tribute?
The 2004 Mazda Tribute has two different engines. The 4 cylinder engine uses 4.5 quarts. The 6 cylinder engine uses 5.5 quarts of oil.
Pcv valve location on a 1999 Mazda b3000?
On a 1999 Mazda B3000, the PCV valve is in one of two places, depending on the engine. On SOHC 4-cylinder engines, the PCV valve is mounted on the oil separator on the left side of the engine. On DOHC 4-cylinder engines, the valve is behind the coolant bypass hose..
How many edges are in cylinder?
A cylinder has two edges one at the top and one at the bottom.
What are the two positions of a cylinder?
A cylinder doesn't move, it has one position.
How do you fix a clutch master cylinder on 1996 Mazda 626?
the clutch on the 626 is hydrolic like on the mx6 you have two chioces if its the cylinder and not the lines or transmission choice one replace hole cylinder cost 65 dollars plus choice two try to find a rebuild kit cost 15 dollars plus the rebuild kit should have all the enter workings of the cylinder and they are easy to put together
Show you where is ignition coils on Mazda protege 2003?
On top of the engine..Two black blocks that have wires coming out of it
How many Spark plugs 2003 ram 5.7 hemi?
16, two per cylinder.
How many egdes does a cylinder have?
two, one edge at each end of the cylinder
What size motor does 1994 Mazda MX3 have?
There are two different engines for a 94 mx3. The 4 cylinder is a 1.6 and the 6 cylinder is 1.8. You can get your vin number and there are websites that can give you the exact spec.'s
How many cylinders does a 1992 Dodge Ram 250 have?
Engine- 6 or 8brake, one master cylinder, two wheel cylindersclutch, one master and one slave cylinder.Engine- 6 or 8brake, one master cylinder, two wheel cylindersclutch, one master and one slave cylinder.
Where is and how do you replace 91 Mazda 626 DX clutch slave cylinder?
The clutch slave cylinder on a 91 Mazda 626 DX is located on the clutch bell housing. To replace the unit, first remove the hydraulic line and turn the line cap counterclockwise. Remove the two bolts holding the slave cylinder in place. Reverse directions to install new unit.
What is two circles and one rectangle?
a cylinder
