You may have a flat battery, a blown fuse or a loose wire. You need to trouble shoot your electrical system to find the fault.
cant turn the key ignition on my 1996 aerostar ford
you might need a new ignition
i think you have to push in the tripometer turn on ignition and then wait second, turn off the ignition and turn back on i did it once but cant remember all of it
It may be that when you shut down your car earlier you had your steering wheel turned just so. Try inserting your key in the ignition and turn your steering wheel just slightly and see if that will unlock the switch. I had that happen to me and that is all I needed to do. Hope this helped.
Ignition switch not releasing pawl in steering lock
make sure front wheels are straight when you turn car off you might have to turn wheel as hard as you can to left and turn ignition key
there is no Chevy town and country. its a Chrysler.
cheeck out the fuse box.....
Do you ever try by pressing the brakes and then turn back off the key ti works, or press the release transmission button, and turn back the key
will the key turn at all,the pin cant be pushed in if key wont turn.if key dont turn you will have drill pin
Turning my ignition on and wont turn off because it is faulty.
Could be either a bad ignition switch or a bad voltage regulator (not opening circuit on shut-down)