To disconnect a key immobilizer in a Daewoo Lanos, you typically need to locate the immobilizer unit, which is usually found near the ignition switch or under the dashboard. Carefully disconnect the wiring harness from the immobilizer module, ensuring that the battery is disconnected first to avoid any electrical shorts. However, tampering with the immobilizer can lead to security issues or vehicle malfunction, so it’s advisable to consult a professional mechanic or refer to the vehicle’s service manual for guidance.
i was told its the same fuse as the interior light
get a Auto electrican to sort it out I do not think you can reset it
The first step to remove a Daewoo immobilizer control unit is to disconnect the negative battery cable. Remove the knee bolster panel and the instrument panel side cover. Unbolt the knee bolster and remove it. Unbolt the immobilizer unit. Finally, remove it and disconnect all electrical connectors.
where is the ignition module on 2000 daewoo nubria
If the lights on a 1999 Daewoo Lanos are flashing, the engine is misfiring. It is likely the spark plugs need to be replaced and can be evaluated by a mechanic to resolve this issue.
To reset the immobilizer on a Daewoo Matiz, you typically need to use the original key and insert it into the ignition. Turn the key to the "On" position without starting the engine and leave it there for about 10 minutes. This process allows the system to recognize the key. If the issue persists, consulting the owner's manual or a professional mechanic is recommended for further assistance.
If there is a red blinking light on top of the dashboard(blinks every second or so), then, yes, it is!
just under ignition coil
Dealer? Locksmith?
So the CODE word of the day is what?
To reset the central locking remote on a Daewoo Nubira, begin by inserting the key into the ignition and turning it to the "On" position without starting the engine. Then, press and hold the unlock button on the remote for about 10 seconds. After releasing the button, turn the ignition off and test the remote to see if it has been reset successfully. If it doesn’t work, you may need to consult the owner's manual or a professional for further assistance.