0
Hubs need turning on?
Or maybe a fuse?
If it is an automatic 4wd system (i.e. does not have manual hubs), you may need to replace the hubs.
To diagnose this, jack up the front of the truck and place jack stands under both front axels so that the wheels are just off the ground. Then jack up the back of the truck so that all 4 wheels are suspended off the ground. Start the truck and put it into (forward) gear. the rear tires should be spinning. engage the 4wd system. Look underneath the truck. If the front drive shaft is spinning, but the front wheels are not turning, then you need to replace the hubs. I am told this is a pretty common problem with these trucks.
What else can I help you with?
Is the 2001 Mazda b4000 4x4 an interference engine?
NO, the Mazda B4000 is basically a re-badged Ford Ranger. The 4.0 L engine has a timing chain and not a belt.
Will 1998 ranger 4x4 transmission with 3.0 engine interchage with 1994 Mazda b4000 with 4.0 engine?
it depends on the bolt patterns but don't c y not but if its a 4x4tranny it may not if the Mazda isn't a 4x4
What is the spark plug gap on a 1998 Mazda b4000 4 x 4 truck?
The recommended spark plug gap for a 1998 Mazda B4000 is .054"
Need a 2004 Mazda B4000 Truck Fx2 Owner's Manual?
www.promanuals.com/serviceparts/2004-mazda-b4000-truck-owners-manual-automated-download
How do you get out a transmission on a Mazda b4000 4x4?
To remove the transmission from a Mazda B4000 4x4, first ensure the vehicle is securely lifted and supported. Disconnect the battery, then drain the transmission fluid and remove the drive shafts. Next, unbolt the transmission from the engine and detach any electrical connectors, shift linkage, and any other components that may obstruct the removal. Finally, carefully slide the transmission out from under the vehicle, ensuring to support its weight appropriately.
Where is fuel sending unit on 1994 Mazda b4000 truck?
where i look only year 1994 mazda b4000 truck -fuel sending that find hard time
How do you remove a b4000 mazada automatic transmission?
Instructions on how to remove a 1994 B4000 Mazda 4 wheel drive transmission
Where is the fuel filter on a 1996 Mazda B4000?
In the engine bay
Why are the Hazard lights not working 98 Mazda b4000 but turn signals work?
your hassard lites have a separate flaher relay change it.
How do you change rear axle seal 99 Mazda B4000 4x4?
To change the rear axle seal on a 1999 Mazda B4000 4x4, first, safely lift and support the vehicle. Remove the rear wheels and disconnect the brake components. Then, drain the differential fluid and remove the axle housing cover to access the axle shafts. Carefully extract the axle shaft, remove the old seal using a seal puller, and install the new seal before reassembling the axle and refilling with fluid.
Where is the diagnostic connector on a 1994 Mazda B4000?
Just behind the battery
What motor is in a 1995 Mazda b4000?
4.0 l ford engine
