If your ABS light indicator is not coming on in your 2004 Toyota Highlander model car even when you start the ignition it might be an issue with the electrical system.
Yes, there is an ABS light indicator in the 2004 Toyota Highlander model.
On a 2012 toyota Highlander, How do you replace tail light Assembly
To reset the VSC light on a 2002 Toyota Highlander, first, turn the ignition to the "ON" position without starting the engine. Press the gas pedal to the floor three times within five seconds, then turn the ignition off. Start the engine, and the VSC light should be reset. If the light persists, there may be an underlying issue that needs to be diagnosed.
Yes, it is possible that the ABS system in your 2004 Toyota Highlander does work even if the light does not come on. However, the only way to know that it works for sure it to have the system tested.
what need to do when indicator light is on
Vsc light
On the 2006 Toyota Highlander, the tire pressure reset button is typically located beneath the steering wheel, near the driver's side dashboard. It may be necessary to look closely, as it can be somewhat hidden. To reset the tire pressure monitoring system, turn the ignition to the "on" position (without starting the engine) and press the reset button until the indicator light blinks three times.
The lamp in the top brake light of a Toyota Highlander can be replaced by the locating the light housing from the trunk. Find the light cover and remove it to access the lights. Replace the bulbs.
If you are referring to the shift position indicator located next to the shift lever - YES, it is supposed to be illuminated when the headlights (not the DRL's) are activated.
It is possible that a check engine light on a Toyota Highlander will come on if the coolant level is low. Usually, though, there is another light that will come on that says 'low coolant' on some older Toyota's.
is safe to drive a vechicle when the vsc light is n