If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
It's the turn signal indicator-located behind the hazard lights.You have to take it out and replace it.
Turn signal flasher?
Turn signal bulbs and hazard bulbs are the same bulb. When the turn signal is turned on, the indicator light on the dash flashes in tune with the turn signal. When the hazard lights are turned on, an extra fuse which is live, powers the hazard flashers, even if the car is turned off.
it called your turn signal is on
The hazard switch and the turn signal and brake lights are all incorparated, chances are the 3-1 switch is broke internally check all fuses
it could be a bad relay
It needs checked out but both the hazard and brake lights go through the turn signal switch.
Sounds like you simply have A burned out bulb, Turn the signal on and look at all the lights to see if any are burned out. Could be A marker light if its in the turn signal circuit.
They use separate flasher relays. Replace the turn signal flasher relay.
The switch must be shot. What kind of vehicle is it?
The whole turn signal arm unit needs to be replaced
It could be a faulty ground wire.