The TRAC light blinking on and off in a 1997 Lexus LS400 typically indicates that the traction control system is actively engaging or that there's an issue with the system. This could be due to wheel slip, a malfunction in the traction control sensors, or a related component like the ABS system. It's advisable to have the vehicle scanned for error codes to diagnose the specific problem accurately. If the light persists, consulting a professional mechanic is recommended to ensure safe operation.
Around 56K. You can download a 1997 flyer on the Lexus website.
gonna need more information before i can answer this one.
To replace the gearshift light in a 1997 Lexus LS400, first, ensure the vehicle is in "Park" and disconnect the negative battery terminal for safety. Remove the gearshift knob by pulling it straight up, then remove the surrounding trim panel by gently prying it off. Locate the bulb socket at the base of the gearshift lever, twist it counterclockwise to remove, and replace the old bulb with a new one. Reassemble by reversing the steps and reconnecting the battery.
In a 1997 Lexus LS400, the fuse box is located in two places. The primary fuse box is under the dashboard on the driver's side, near the steering column. There is also a secondary fuse box located in the engine compartment, near the battery. For detailed access, it's advisable to consult the owner's manual for specific locations and diagrams.
1990-1994 = 250hp 1995-1997 = 260hp 1998-2000 = 290hp 2001-2006 = 290hp 2007-present = 380hp
In a 1997 Lexus LS400, there are typically four O2 sensors located in the exhaust system. Two are positioned upstream (pre-catalytic converter) and two downstream (post-catalytic converter) of the catalytic converters. The upstream sensors monitor the air-fuel mixture, while the downstream sensors check the efficiency of the catalytic converters. Accessing them usually requires lifting the vehicle for better visibility and reach.
In a 1997 Lexus LS400, there are typically two oxygen sensors located in the exhaust system. The first sensor, known as the upstream sensor, is positioned before the catalytic converter, while the second sensor, the downstream sensor, is located after the catalytic converter. Both sensors are mounted on the exhaust pipes and are crucial for monitoring the air-fuel mixture and emissions control. Accessing them may require lifting the vehicle for better visibility.
There is a problem with the SRS. Take it to a dealer and have this checked into, ASAP.
Yes you can just replace the headlight bulbs. First you have to take out the cover by the battery. Then unscrew the cover by the radiator and simply lift it up to take it off. The light bulbs are visible at this time.
ITS HARD TO TELL THE SPECIFIC REASON A WARNING LIGHT LIGHTS UP ON A VEHICLE WITH OUT CHECKING IT, BUT A BLINKING LIGHT USUALLY MEANS HAVE CHECK ASAP. A STEADY LIGHT MEANS HAVE IT CHECK AT YOUR CONVINIENCE.
It COULD be the fuel pressure or if the theft system light on dash is blinking,it is that.
it mean there is a hydraulic or electrical fault on the transmission