idrk
To set the time on a Cardinal W1113 watch, first, unscrew the crown and pull it out to the time-setting position. Then, turn the crown to adjust the hour and minute hands to the desired time. Finally, push the crown back in and screw it tightly to secure it back in place.
Press and hold the "reset" button for several seconds. Press "st/stp" button to advance blinking function. To change to next function press "mode" button. Then press "st/stp" button to advance blinking function. Again, press "mode" button for next function. When satisfied, click "reset" button.
To set the time 1. Hold the reset button until the hour mode (12/24) is flashing 2. Press the mode button to scroll (year, month, day, hour) 3. Use the ST/STP button to advance 4. Press reset button to return to normal operation To set the alarm 1. Press the mode button to scroll to AL1 mode 2. Press the reset button to scroll through the 3 alarm modes 3. When alarm mode is displayed hold the reset button until the time is flashing 4. Use the ST/STP button to advance 5. Press reset button to return to normal operation Note: To change AM to PM you must advance through a complete 12 hour cycle.
To change the time one a coss watch: 1. you press mode and keep pressing it until your back to were you started only now the seconds (little numbers that counts up to 60) is flashing. 2. you press reset then the minute starts to flash 3. you press start to change it and you will see every time you press start you get a new number from 0 to 59 4. once you have the right number of minutes you press reset again and you will find the hour flashing press start again and you get to choose numbers from 00:00 to 24:00 5. To save you press mode again
To set the time on a Michele watch, find the crown on the side of the watch and gently pull it out to the first position. Rotate the crown until the correct time is displayed, then push the crown back in to secure the time setting. Ensure the watch is wound and running before adjusting the time.
Idk about a UL 1132 A126, but on my UL 1138, all you have to do is the following: 1. Make sure you're on the regular time mode. 2. Hold down the reset button. 3. While holding the reset button down, press the start/stop button once. You should hear a beep, indicating the alarm has switched from on to off. Also, the small alarm icon under the digits should have disappeared.
There are 4 button functions on the c9 Champion watch A (light), B (mode), C (start), and D (reset). To change the time, you need to push the mode button 3 times. This will cause the seconds place value begin to blink. By pressing the reset button you can move to hour, minutes, and seconds. You can increase the time by one digit by pushing the start button once or hold it in to make the numbers move faster. Once you have entered the correct time, hit the mode button to allow your watch to start keeping time.
Hold S3 button about 3 seconds, then press S3 agaoin once. Tuesday and seconds digit will flash. Push S1 button and seconds will reset to zero. Push S2 button to change modes, then S1 button to advance. When finished, press S3 once more. Note: Buttons on watch are S2, S1, S3. IN THAT ORDER, if watch face is facing you.
hold down the button that says lap/reset until it says set. then hit mode to go to different time or date settings. press st/stop to move the number forward.
To reset a Cardinal WR50M watch, first, pull the crown out to the second position. Then, press the reset button, usually located on the side of the watch, to reset the time or features. After making your adjustments, push the crown back in to set it in place. Make sure to check the watch's manual for specific instructions related to your model.
because of the time difference
In order to reset the time on the Timex Ironman Watch, locate the mode button and press it until the time and date show. Then locate the set button, press and hold until the word time appears and then release the button. Now set the time and press the set button one more time. The time has been reset and complete.
Watch on Sunday. Nobody knows yet unless you have a time machine.
From the time mode, press and hold reset. This will make the analog hands start to turn. press reset again to stop at correct time.
A ordinary watch won't work. You need a watch with a Braille face so the person can use their fingers to read the time.
Hold the reset button and when the time starts to blink push the st/stp button which will change the time and press the mode button to change from hour to min. Press the reset button to save it .
Kurt Angle was a four-time WWE Champion and a one-time World Heavyweight Champion.