0
What else can I help you with?
Why would you use a concave mirror instead of a flat mirrors?
For what prupose? If it is for a shaving mirror then concave mirror would produce a magnified image which would be helpful for clean shaving.
What type of mirror would be used for the solar heating of water?
A parabolic mirror would be used for the solar heating of water. This type of mirror is designed to focus sunlight onto a specific point, creating high temperatures suitable for heating water or other fluids.
What part of a reflecting telescope would you measure to find the apeture?
To find the aperture of a reflecting telescope, you would measure the diameter of the primary mirror. The aperture of a telescope is the diameter of its primary light-gathering element, which in the case of a reflecting telescope, is the primary mirror.
What advice would you give someone about how to collect light to shine into a microscope?
light is collected by a mirror at the base of the microscope. The mirror is held in special joints that allow it to move in any direction. The light comes from a lamp or from a sunless sky. It must never be collected directly from the sun as this can cause sever eye damage and blindness. Some microscopes have a built-in lamp instead of a mirror. The light either shines directly through a hole in the stage onto the specimen or it passes through a hole in a diaphragm.
Why concave mirror is used in search lights?
The concave shape focuses the light into a narrow beam. If the mirror was convex, the light would be spread out - useless for searching into any distance.
Would a drunk driver be viewed as mentally ill?
Not always. Being charged once or twice would not be viewed as mentally ill, but a large amount of DUI charges may be viewed as mentally ill, depending on the case.but then again it depends on your definition of mentally ill.
Where would one be able to purchase a fogless mirror?
There are many places where one can purchase a fogless mirror. These includes large home improvement stores, bathroom salesrooms and sites such as Amazon.
Why a side mirror is never a concave mirror?
A concave mirror would focus the light back towards the focal point of the mirror. You would not be able to use the mirror effectively with a concave.
What would happen if an ugly goblin looked in the mirror?
the mirror would be broken!!!
Do cows have big nostrils?
Yes, cows do have large nostrils. These large nostrils will allow more air into the lungs than smaller nostrils would.
When would you mirror databases and when would you use databases tailored for the local environment?
You would mirror a database when you have a distributed database management system (DDBMS). especially in different countries with different time zones to allow users perform insert, update and delete operations to avoid inconsistency in database values. This is a security and disaster management implementation.
How do you cut a large mirror down to size?
If you are familiar with a glass cutter, use that to resize the mirror. My best suggestion would be take it to a glass shop and let them do it. They can bevel the edges and its a whole lot safer.
Why would you use a concave mirror instead of a flat mirrors?
For what prupose? If it is for a shaving mirror then concave mirror would produce a magnified image which would be helpful for clean shaving.
Why would James Phipps parents allow Jenner to vaccinate him?
because they would have got paid (probably a large amount) to have this done to their son
What is the mirror image of TARAIN1014A?
The mirror image of TARAIN1014A would be A4101NIARAT.
What does a mirror look like in a mirror?
It would show the smaller mirror, and reflections of it and the smaller mirror within, going to infinity. See the related link.
What does the curved mirror on a telescope do?
The mirror in a telescope is a concave mirror. That shape redirects all the light coming from a distant object that hits the mirror into a focusing lens. The mirror may be as small as several inches or many feet in diameter and it concentrates the light so it can be focused by a small eyepiece that may be only a fraction of an inch in diameter. The mirror serves the same purpose as a large lens in a refractive telescope. It takes a large cross section of light and focuses it into the eyepiece of the telescope but it does it by reflection rather than refraction. The reflective mirror is preferred over a lens for several reasons. The light reflected by a good quality silvered mirror loses very little of its intensity. Light passing through a lens loses intensity each time it passes through a glass surface and it must pass through 2 surfaces of a lens. The mirror bends the light one time and a lens bends it twice. The more times you bend light, the more chance you have to introduce distortion because of imperfections of the surface. If the glass of a lens is not ultra pure and without imperfection, the light is further distorted. The quality of glass in a mirror does not affect the light because the light does not pass through the mirror because the light is reflected off the first surface. When very large telescopes are involved, a refraction lens would weigh many times what the reflective mirror weighs.
